Fluke I430-FLEXI-TF-II Power Quality Analyser Clamp, Accessory Type Flexible AC Current Probe

  • RS Stock No. 818-7357
  • Mfr. Part No. I430-FLEXI-TF-II
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): RO
Product Details

i430-Flexi-TF-II 6000A Flexible AC Current Probe

The i430-Flexi-TF-II flexible AC current probe is optimized for current measurement on thick and hard to reach conductors. The i430-Flexi-TF-II is a flexible AC current probe for use with the Fluke 430 series Power Quality Analyzers including Series II.

Measuring range: 0.5 to 6000 A ac
Bandwidth (-3 dB): 10 Hz to 10 kHz
Output signal: 86.6 mV at 1000A/50Hz (on 1 MΩ), 85.0 mV at 1000A/50Hz (on 50 kΩ)
Maximum non-destructive current: 100 kA (50/60 Hz)
Transducer length: 610 mm (24 in)
Transducer diameter: 7.5 mm (0.3 in)
Minimum bending radius: 38 mm (1.5 in)
Cable length from transducer to BNC: 2.5 m (98.4 in)
Complies with: IEC 61010-1: Pollution degree 2, IEC 61010-2-032: 1000V CAT III/ 600V CAT IV, IEC 61010-031

Supplied with

Instruction Sheet

Fluke Flexible AC Current Probe

The Fluke flexible AC current probe has a current measuring range from 0.5A to 6000A. This lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source. It is also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4 pack is perfect for use with 3-phase tools such as the Fluke 430 series.
Supplied with
Instruction Sheet

Features and Benefits

• Bandwidth (-3dB): 10Hz to 10kHz
• Output signal is 86.6mV at 1000A/50Hz (on 1 Mohm), 85.0mV at 1000A/50Hz (on 50kohm)
• Maximum non-destructive current is 100kA (50/60Hz)
• The transducer length is 610mm (24in)
• The transducer diameter is 7.5mm (0.3in)
• Minimum bending radius is 38mm (1.5in)
• Cable length from transducer to BNC: 2.5m (98.4in)

Certifications


IEC 61010-1: Pollution degree 2
• IEC 61010-2-032: 1000V CAT III/ 600V CAT IV safety rated
• IEC 61010-031
• UL94 approved
• IP41 rated
• CE
• CSA certified

Specifications
Attribute Value
Accessory Type Flexible AC Current Probe
For Use With Fluke 433/434/435/434-II/435-II/437-II
Temporarily out of stock - back order for despatch 30/06/2020, delivery within 1 working days from despatch date.
Price (ex. GST) Each
$ 586.00
(exc. GST)
$ 644.60
(inc. GST)
units
Per unit
1 +
$586.00
Related Products
Chauvin Arnoux E3 ac/dc Probe Current clamp specifically ...
Description:
Chauvin Arnoux E3 ac/dc Probe Current clamp specifically designed for use with oscilloscopes Clamp makes it possible to monitor current waveforms directly and without breaking a connection Note This product requires a PP3 battery for operation (stock number 450-3092) Current ...
Chauvin Arnoux MN60 Mini Clamps Dual range ac. ...
Description:
Chauvin Arnoux MN60 Mini Clamps Dual range ac. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10k Hz bandwidth Ergonomic jaw design for measurement where access is difficult and ...
i30s 30A High Resolution, High Bandwidth Oscilloscope Current ...
Description:
i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents ...
i3000s Flex 24 Flexible 3000A ac. Current Probe ...
Description:
i3000s Flex 24 Flexible 3000A ac. Current Probe Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended ...