Hi-Force Single Portable Hydraulic Cylinder - Hollow Pulling Type HHS302, 33T, 50mm

  • RS Stock No. 808-135
  • Mfr. Part No. HHS302
  • Manufacturer Hi-Force
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Hollow Cylinders - High Pressure

The through-bore piston design offers the user flexibility when selecting equipment to provide a pulling force. This range of cylinders can also be used in the pushing mode
The replacement saddle is threaded to screw into the threaded counter-bore of the piston rod
The plain bore maintains the through bore of the piston rod

//media.rs-online.com/t_line/L808113-01.gif

Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard.
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps

Warning

  • Saftey Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specifications
Attribute Value
Manufacturer Series HHS
Single/Double Acting Single
Capacity 33t
Stroke 50mm
Closed Height 165mm
Extended Height 215mm
Cylinder Effective Area 46.7cm²
Oil Capacity 233cm³
Centre Hole Diameter 60mm
Outside Diameter 92mm
Maximum Operating Pressure 700 bar
Weight 10.6kg
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 1,048.24
(exc. GST)
$ 1,153.06
(inc. GST)
units
Per unit
1 +
$1,048.24
Related Products
For lifting and pushing applications where flexibility and ...
Description:
For lifting and pushing applications where flexibility and high cycle requirements exist Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity Suitable for use in a ...
Use where collapsed height is a premier requirement ...
Description:
Use where collapsed height is a premier requirement in a lifting, levelling or pushing application Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity
Combine minimum collapsed height with optimum stroke They ...
Description:
Combine minimum collapsed height with optimum stroke They provide a short adjusting and lifting force in confined work areas Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension
Single acting hollow plunger pump-sets for lifting, push ...
Description:
Single acting hollow plunger pump-sets for lifting, push and pull applications The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a ...