RS PRO Push-in Push-in
- RS Stock No.:
- 144-2643
- Distrelec Article No.:
- 304-16-964
- Brand:
- RS PRO
Bulk discount available
Subtotal (1 bag of 10 units)*
$28.34
(exc. GST)
$31.17
(inc. GST)
FREE delivery for orders over $60.00 ex GST
In Stock
- 23 unit(s) ready to ship
- Plus 667 unit(s) ready to ship from another location
- Plus 28 unit(s) shipping from 03 June 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Bag(s) | Per Bag | Per unit* |
|---|---|---|
| 1 - 4 | $28.34 | $2.834 |
| 5 + | $23.30 | $2.33 |
*price indicative
- RS Stock No.:
- 144-2643
- Distrelec Article No.:
- 304-16-964
- Brand:
- RS PRO
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | RS PRO | |
| Product Type | Pneumatic Fitting | |
| Sub Type | Reducer | |
| Connection Type A | Push-in | |
| Connection Size A | 6 mm | |
| Connection Type B | Push-in | |
| Connection Size B | 4 mm | |
| Minimum Operating Temperature | 0°C | |
| Material | Plastic | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Chemical Resistant | No | |
| Maximum Operating Pressure | 9.7 bar | |
| Food Grade | No | |
| Select all | ||
|---|---|---|
Brand RS PRO | ||
Product Type Pneumatic Fitting | ||
Sub Type Reducer | ||
Connection Type A Push-in | ||
Connection Size A 6 mm | ||
Connection Type B Push-in | ||
Connection Size B 4 mm | ||
Minimum Operating Temperature 0°C | ||
Material Plastic | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Chemical Resistant No | ||
Maximum Operating Pressure 9.7 bar | ||
Food Grade No | ||
- COO (Country of Origin):
- TW
RS PRO Straight Tube-to-Tube Adaptor to Push In 4 mm to Push In 6 mm, 9.9 kgf/cm², 9.7 bar
Connect piping in your pneumatic system with one of these RS PRO straight tube-to-tube adaptors. It's MADE of tough polyoxymethylene (POM) plastic, so it's suitable for heavy-duty applications.
Both ends have a push-in style connection, which makes it easy to install or remove tubing. All you need to do is push a tube into one of the holes. When you're done, just push the sleeve to disconnect it from the fitting.
As part of the RS PRO range, these specialist adaptors have been tested for quality. Adaptors like these are often used inside workshops and repAir shops to connect tubes used in compressed Air cleaning. They're suitable for use with Air only.