12V dc 1 Output Through Hole PCB Transformer, 7.5W

  • RS Stock No. 869-5038
  • Mfr. Part No. 47202
  • Manufacturer Myrra
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Single Regulated DC Output Electronic Transformers

MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology
They are an interesting alternative to the traditional supply in the most common applications of power lower than 5W
ENERGY SAVING due to high efficiency and low standby power
The applications for the Electronic series are, telecom supplies, electric substations etc. Industrial, domestic and consumer electronics
With the same footprint as a EI30 transformer, they will replace the 50 Hz Transformer, Fuse, Bridge Rectifier, Regulator and Filtering Capacitor

Specifications
Attribute Value
Secondary Voltage Rating 12V dc
Power Rating 7.5W
Primary Voltage Rating 85 → 265 V ac, 120 → 370 V dc
Number of Outputs 1
Mounting Type Through Hole
Minimum Temperature -25°C
Maximum Temperature +70°C
Minimum Operating Frequency 47Hz
Maximum Operating Frequency 63Hz
6 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each
Was $40.98
$ 39.48
(exc. GST)
$ 43.43
(inc. GST)
units
Per unit
1 - 9
$39.48
10 - 24
$38.80
25 +
$37.45
Related Products
Description:
Type WUD 21 x 65 → 1 VA transformers Secondary voltages are nominal load voltages on resistive loads.Only the pins indicated on the wiring diagram "physically" exist. Standards IEC 742, VDE 0551, SEV 1003 Approvals UL 506. Secondary voltages are ...
Description:
Type UI 39 - 10 VA → 30 VA Secondary voltages are nominal load voltages on resistive loadsOnly the pins indicated on the wiring diagram "physically" exist. Standards IEC 742, VDE 0551, SEV 1003 Approvals UL 506. Secondary voltages are ...
Description:
Type EI 42 / 148 → 5 VA transformers Secondary voltages are nominal load voltages on resistive loads. Approvals UL, VDE. Secondary voltages are nominal load voltages on resistive loads.
Description:
Type EI 48 / 168 → 10 VA transformers Secondary voltages are nominal load voltages on resistive loads. Approvals UL, VDE. Secondary voltages are nominal load voltages on resistive loads.