Fluke 196C 190C Series Handheld Digital Oscilloscope, 2 Analogue Channels, 100MHz

RS Stock No.:: 480-9384
Mfr. Part No.:: FLUKE 196C
Brand:: Fluke

Fluke 196C 190C Series Handheld Digital Oscilloscope, 2 Analogue Channels, 100MHz

This image is representative of the product range

Discontinued product

Alternatives

This product is not currently available. Here are our alternative recommendations.

Fluke 120 Series 123 Oscilloscope Probe, 20MHz, BNC Connector

RS Stock No.: 240-9522

Each

$2,190.30

(exc. GST)

$2,409.33

(inc. GST)

Fluke 199C 190C Series Analogue, Digital Handheld Digital Oscilloscope, 2 Analogue Channels, 200MHz

RS Stock No.: 480-9407

Each

$6,624.59

(exc. GST)

$7,287.05

(inc. GST)

Fluke 190 ScopeMeter 190 II Series, 100MHz Handheld Oscilloscope

RS Stock No.: 716-7396

Each

$8,607.97

(exc. GST)

$9,468.77

(inc. GST)

RS Stock No.:: 480-9384
Mfr. Part No.:: FLUKE 196C
Brand:: Fluke

ScopeMeter 196C & 199C

Frequency spectrum analysis (FFT)
N-cycle triggering mode for stable live signal image of complex waveforms
Dual slope triggering for acquisition on both rising and falling edges, useful for analysing digital data streaming and single shot phenomena
Cursor limited automatic measurements allow Vrms and power measurement on user defined portion of a waveform
Continuity: beeper on <50Ω (±30Ω)

Supplied with

rechargeable battery pack (fitted); mains adaptor/battery charger: 2 each (1 red and 1 grey); VP200 voltage probe sets; AS200 probe accessory sets; shrouded multi-meter test leads.

ScopeMeters

Handheld, battery powered, 2 channel oscilloscopes with up to 200MHz banswidth and 2.5 GS/s real time sampling per output.

Fluke 190 Series ScopeMeter Features

27500 points per input record length using ScopeRecord™-Roll captures complete motion profiles, and UPS-, power supply- and motor start-ups. 100x zoom for detailed analysis of fast intermittent events
Record length 3000 points per channel
Advanced triggering capability. Connect-and-View™ automatic triggering for simplicity, a full range of manual triggering modes plus external triggering (third input) for complex timing
Stop-on-Trigger in ScopeRecord mode stores and analyzes pre-trigger waveform data
Automatic capture and replay of 100 screens, allows instant replay as a live animation or picture-by-picture
Digital persistence for analysing complex dynamic waveforms like an analogue scope
28 Automatic waveform measurements
Cursors, Zoom and real time clock. For analysis of signal details, long records and TrendPlot™
144mm LCD display, 190B range – monochrome, 190C range – high resolution colour
V_pwm function for motor drive and frequency inverter applicationsIndependently floating isolated inputs. Up to 1000V between inputs, references and ground
Waveform reference for visual comparisons
5000-count true RMS multi-meter & dual channel TrendPlot™ paperless recorder for up to 8 days of trend and intermittent fault analysis
Save up to 2 recordings for later analysis and recall
Save up to 10 screens and setups
Print screens directly or download data to a PC for later analysis and documentation with Flukeview® software
Four-hour rechargeable NiMH battery pack
Complies with EN61010-1 (safety standard) 1000V CAT II and 600V CAT III
Fast display update rate for seeing dynamic behaviour instantaneously
Dimensions (HxWxD): 256 x 169 x 64mm
Weight: 1.95kg

Attribute	Value
Number of Analogue Channels	2
Bandwidth	100MHz
Oscilloscope Type	Handheld
Series	190C
Power Source	Battery, Mains
Interface	RS232
Display Type	Colour
Minimum Vertical Sensitivity	2mV/div
Maximum Vertical Sensitivity	100V/div
Minimum Time Base	5ns/div
Screen Size	5.7in
Sample Rate Random	1 Gsps
Weight	2kg
Height	64mm
Battery Life	4 h
Dimensions	256 x 169 x 64mm
Maximum Time Base	2min/div
Record Length	3000 points/ch, 27000 points/ch
Vertical Resolution	8 bit
Battery Type	Rechargeable NiMH
Length	256mm
Safety Category Voltage	600 V, 1000 V
Safety Category	CAT II 1000 V, CAT III 600 V
Rise Time	3.5ns
Safety Category Level	CAT II, CAT III