Tektronix TPP0 Series TPP0051 Oscilloscope Probe, Passive Type, 50MHz, 1:10, BNC Connector

RS Stock No.:: 800-3004
Mfr. Part No.:: TPP0051
Brand:: Tektronix

Tektronix TPP0 Series TPP0051 Oscilloscope Probe, Passive Type, 50MHz, 1:10, BNC Connector

View this category

Discontinued product

RS Stock No.:: 800-3004
Mfr. Part No.:: TPP0051
Brand:: Tektronix

Technical data sheets

Legislation and Compliance

RoHS Status: Not Applicable

COO (Country of Origin):: CN

Product Details

Tektronix Oscilloscope Probes

The Tektronix passive voltage oscilloscope probe is for use on BNC oscilloscopes with 1Mohm/20pF input. It has an attenuation of 10X with 10Mohm input resistance.
Note:
All the products in this range are supplied for use with instruments with a permanent earth connection.

Features and Benefits

Bandwidth is DC to 50MHz
Attenuation ratio is 1:10
Input impedance is 10Mohmll12pF
Cable length is 1.3m
Maximum common-mode input voltage is 300KV
Maximum Input voltage is 300VRMS CAT II
Wide compensation ranges between 15pF and 25pF)

Applications

Relative low frequency measurements
Low frequency computer and telecom measurements
Power supplies
Low frequency amplifiers

Certifications

UL61010-031 approved
2007, CAN/CSA C22.2 No. 61010-031-07 certified
IEC61010-031
IEC 61010-031/A1:2008
CAT II 300V

Specifications

Attribute	Value
Probe Type	Passive
Attenuation	1:10
Bandwidth	50MHz
Connector Type	BNC
Model Number p	TPP0051
Number of Probes	1
Series	TPP0
Safety Category	CAT II 300V
Rise Time	7ns