LeCroy ZD1000 Oscilloscope Probe, Probe Type: Active, Differential 1.2GHz 10V

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Teledyne LeCroy ZD Series Active Differential Probes

Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes) differential probes measure the difference in voltage of a test point in relation to another test point. High bandwidth, excellent common-mode rejection ratio (CMRR) and low noise make LeCroy ZD Series differential probes ideal for applications such as automotive development and failure analysis, together with wireless and data communication design. With its ProBus interface, the ZD Series probe becomes an integral part of the oscilloscope. Probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required. Teledyne LeCroy also offers PK111 ( 7898337 ) which is a replacement accessory kit for ZD500, ZD1000 & ZD1500.

Applications:

CMRR (typical) 80dB @ 60 Hz (ZD200), 60dB @ 50/60 Hz (ZD500, ZD1000, ZD1500)

Supplied with

Adapted probe leads and tips, instruction manual, certificate of calibration

Supplied With:

  • Y lead adapter

  • 2x solder-in lead

  • 2x long spring loaded bendable ground

  • 2x tip saver

  • swivel tip adapter

  • 2x small IC adapter

  • 6x micro pogo pin tip

  • 2x right angle connector short

  • 2x right angle connector long

  • 2x micrograbber

  • 2x minigrabber

  • 2x short spring loaded bendable ground

  • probe calibration fixture

  • ZD replacement kit instruction manual

  • Certificate of calibration

Supplied with

Y lead adapter, 2x solder-in lead, 2x long spring loaded bendable ground, 2x tip saver, swivel tip adapter, 2x small IC adapter, 6x micro pogo pin tip, 2x right angle connector short, 2x right angle connector long, 2x micrograbber, 2x minigrabber, 2x short spring loaded bendable ground, probe calibration fixture, ZD replacement kit instruction manual, certificate of calibration

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:1
Bandwidth 1.2GHz
Maximum Common Mode Input Voltage 10V
Model Number p ZD1000
Series ZD
Rise Time 375ps
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
$ 9,358.36
(exc. GST)
$ 10,294.20
(inc. GST)
units
Per unit
1 +
$9,358.36
Related Products
The Tektronix MDO3000 series 500MHz mixed domain oscilloscope ...
Description:
The Tektronix MDO3000 series 500MHz mixed domain oscilloscope offers a 9inch WVGA widescreen colour display This product has 4 analogue channels. This oscilloscope is multi-functional with an integrated basic spectrum analyser, wave inspector navigation, MSO, serial and parallel bus triggering ...
Scope Meter 190 Series Accessories Note For Oscilloscope ...
Description:
Scope Meter 190 Series Accessories Note For Oscilloscope 190 204 series Carrying Case kit see RS stock 716-7416 manufacturers part number SCC290This product has a non UK main plug please refer to RS Stock no 480-4143 (replacement battery charger).
The Tektronix single-ended Active FET oscilloscope probe provides ...
Description:
The Tektronix single-ended Active FET oscilloscope probe provides excellent high-speed electrical and mechanical performance required for digital system designs It is specifically designed for direct connection to oscilloscopes with the TekVP probe interface.Note:TAP1500 includes individual probe case Supplied ...
The Tektronix differential active oscilloscope probe offers truer ...
Description:
The Tektronix differential active oscilloscope probe offers truer signal reproduction and fidelity for high-frequency measurements With ultra-low input capacitance and the versatile device under test connection capabilities, it has excellent high-speed electrical and mechanical performance required for ...