STMicroelectronics VNH7100ASTR Motor Driver IC 16-Pin, SOIC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower® M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in SO-16N package on electrically isolated leadframes. Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level.

Output current: 15 A
3 V CMOS-compatible inputs
Undervoltage shutdown
Overvoltage clamp
Thermal shutdown
Cross-conduction protection
Current and power limitation
Very low standby power consumption
Protection against loss of ground and loss of VCC

Specifications
Attribute Value
Output Configuration Dual Half Bridge
Configuration H Bridge
Maximum Output Current 15A
Maximum Supply Voltage 41 V
Mounting Type Surface Mount
Package Type SOIC
Pin Count 16
Maximum Operating Supply Voltage 28 V
Minimum Operating Supply Voltage 4 V
Typical Switching Frequency 20kHz
Series VNH
Maximum Operating Temperature +150 °C
Automotive Standard AEC-Q100
Product Width 4mm
Width 4mm
Length 10mm
Minimum Operating Temperature -40 °C
Dimensions 10 x 4 x 1.25mm
Product Height 1.25mm
Height 1.25mm
Product Length 10mm
134 In stock for delivery within 7 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 2)
$ 5.40
(exc. GST)
$ 5.94
(inc. GST)
units
Per unit
Per Pack*
2 +
$5.40
$10.80
*price indicative
Packaging Options:
Related Products
BD62222HFP is full bridge driver for brush motor ...
Description:
BD62222HFP is full bridge driver for brush motor applications This IC can operate at a wide range of power-supply voltages (from 6V to 27V), supporting output currents of up to 2.5A. MOS transistors in the output stage allow for PWM ...
The STSPIN32F0 is a System-In-Package providing an integrated ...
Description:
The STSPIN32F0 is a System-In-Package providing an integrated solution suitable for driving three-phase BLDC motors using different driving modes It embeds a triple half-bridge gate driver able to drive power MOSFETs or IGBTs with a current capability of 600 mA ...
The PWD13F60 is a high-density power driver integrating ...
Description:
The PWD13F60 is a high-density power driver integrating gate drivers and four N-channel power MOSFETs in dual half bridge configuration The integrated power MOSFETs have low RDS(on) of 320 mΩ and 600 V drain-source breakdown voltage, while the embedded gate ...
The STSPIN32F0A is a System-In-Package providing an integrated ...
Description:
The STSPIN32F0A is a System-In-Package providing an integrated solution suitable for driving three-phase BLDC motors using different driving modes It embeds a triple half-bridge gate driver able to drive power MOSFETs with a current capability of 600 mA (sink and ...