Recently searched

    Parallax Inc Propeller QuickStart MCU Development Kit 40000

    RS Stock No.:
    779-2719
    Mfr. Part No.:
    40000
    Manufacturer:
    Parallax Inc
    Parallax Inc
    View this category
    2 In Global stock for delivery within 10 working day(s)
    Add to Basket
    units

    Added

    Price (ex. GST) Each

    $61.94

    (exc. GST)

    $68.13

    (inc. GST)

    unitsPer unit
    1 - 9$61.94
    10 - 49$61.39
    50 +$55.26
    RS Stock No.:
    779-2719
    Mfr. Part No.:
    40000
    Manufacturer:
    Parallax Inc
    COO (Country of Origin):
    US

    Technical data sheets


    Legislation and Compliance

    COO (Country of Origin):
    US

    Product Details

    Propeller Quickstart Evaluation Board


    The QuickStart is an evaluation board for the Propeller. As an Open-Source reference design the QuickStart board provides basic Propeller circuitry. Developers may use our PCB layout files as their own to speed their project towards completion. As a project board the QuickStart is fully expandable and provides unimpeded access to all I/O pins through an expansion header but includes some button inputs and LEDs to demonstrate programming. With USB power and a selection of QuickStart Project examples it's also the fastest way to get up and running.


    Propeller 8-core 32-bit microcontroller, 64KB EEPROM (32KB for program, 32KB for general-purpose use)
    Bus-powered USB coupled with 3.3V regulator for 500mA
    5MHz crystal on board may be disabled by removing SMT jumper, allowing replacement with external through-hole crystal
    External brownout reset may be installed by removing SMT jumper
    8 x blue LEDs on P16-P23
    8 x resistive touch-buttons on P0-P7
    Pads for sigma-delta A/D circuitry (two resistors and two capacitors, both 0603 footprint)
    Expansion header provides access to Vss, Vdd, 32 I/O pins (28 x GPIO, 2 for I²C bus and 2 for optional Tx/Rx if connected to USB power)
    Dimensions: 51 x 76mm
    Open hardware reference design through our Altium and DipTrace PCB layout files (more export options may be possible)


    Note

    Also available: Human Interface Board for Quickstart, RS Part No. 779-2721


    The Propeller™ 1 microprocessor chip makes it easy to rapidly develop embedded applications. Its eight 32-bit processors (COGs) can operate simultaneously, either independently or cooperatively, sharing common resources through a central hub. The developer has full control over how and when each cog is employed; there is no compiler-driven or operating system-driven splitting of tasks among multiple cogs. A shared system clock keeps each cog on the same time reference, allowing for true deterministic timing and synchronization. Two programming languages are available: the easy-to-learn high-level Spin, and Propeller Assembly which can execute at up to 160 MIPS (20 MIPS per COG).


    Specifications

    AttributeValue
    ClassificationDevelopment Kit
    Kit NamePropeller QuickStart
    TechnologyMCU
    Processor Part NumberP8X32A
    2 In Global stock for delivery within 10 working day(s)
    Add to Basket
    units

    Added

    Price (ex. GST) Each

    $61.94

    (exc. GST)

    $68.13

    (inc. GST)

    unitsPer unit
    1 - 9$61.94
    10 - 49$61.39
    50 +$55.26