Schaffner 4A, 250 V ac Male Flange Mount IEC Inlet Filter FN9260B-4-06, Faston 2 Fuse

Lightweight construction
Designed for one or two fuses

Fuses not included

Neutral line must not be fused where it is referenced to earth.

UL recognised component, CSA certified, VDE, SEMKO

The Schaffner IEC inlet filter is a dual male fuse, panel mount with IEC connector power entry module. It has a voltage rating of 250VAC with 4A high-performance current rating. It is a medical version with a bleed resistor and without Y2 capacitor. The operating frequency of this filter ranges between 50Hz and 60Hz.
Schaffner medical FN92XXB and FN28XB series
IEC inlet plugs with integral mains filter are designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 (1/4in) receptacles. Low earth leakage current. IEC 950 compliant.

Warning:
Neutral line must not be fused where it is referenced to the earth.

Lightweight construction
Fuse drawer with easy-access
Fast-On terminals
Maximum leakage current is 2μA
Operating temperature ranges between -25°C and 85°C

Electrical and electronic equipment
Medical equipment
Household equipment
Single-phase and switch-mode power supplies
Test and measurement equipment.

UL approved
CSA Certified
VDE
SEMKO
IP40 rated

Schaffner Medical FN92XXB and FN28XB Series

IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically stock no. 526-0724).,Low earth leakage current. IEC 950 Compliant.