Rittal PK Series Grey Polycarbonate Enclosure, IP66, IK08, Flanged, Grey Lid, 94 x 65 x 57mm

The PK series terminal housings are made of fibreglass-reinforced polycarbonate and provide optimum protection for installing electronic modules, relays etc.These enclosures are rugged and protect electric and electronic components from water and dust accumulation.
They are specifically suited for use with control components (actuators).Available with a light grey cover or a clear cover.
The enclosure consists of two parts (upper and lower), 4 cover screws and 4 insulating covers for mounting the bottom plate.

• Fibre-glass reinforced polycarbonate housing

The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture.

The NEMA 4X Rating Standard is an equivalent of IP66 rating and it means that enclosures have been constructed for either indoor or outdoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment; to provide a degree of protection against falling dirt, rain, sleet, snow, windblown dust, splashing water, hose-directed water, and corrosion; and that will be undamaged by thee external formation of ice on the enclosure

• Enclosure (Upper and Lower part)

  Bureau Veritas

Use this enclosure from Rittal to safely house your electronic components. Its fibreglass-reinforced polycarbonate body is resistant to impact and heat for durability. Thanks to its broad operating temperature range of -35°C to +80°C, it's suitable for use in harsh environments. It comes with an all-around polyurethane foam seal to keep dirt particles and moisture out, helping to keep your components functioning optimally.

• Tough polyamide cover screws are wear-resistant for a firm hold
• Light weight of 1.104kg for minimal strain on the mounting surface

• Control panels
• Packaging industry
• Airports and seaports

This enclosure is designed for wall mounting. It comes with insulating bungs that let you securely attach the mounting screws. As the bungs are made from polyethylene, they're resistant to solvents and chemicals for safe use in demanding environments.