Phoenix Contact PT 2.5/1P Series Grey Feed Through Terminal Block, 0.14 → 4mm², Single-Level, Plug In Termination

Pluggable modular terminal blocks with PT Push-In technology for the modular set-up of control cabinets and systems. The COMBI plug connectors with PIT Push-In connection can be used for signal as well as power wiring. Respective ground terminal blocks are available in the same shape as the basic terminal blocks.

With the standardized COMBI plug-in zone, COMBI plug connectors of all connection methods can be used
Push-In technology with 50 % less insertion force for direct plugging from 0.34 mm²
Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
Actuation button can be operated with any kind of screwdriver
Double bridge shaft for an individual power distribution and supply

Keep your control cabinet organised with this feed-through terminal block from Phoenix Contact. It's a safe and easy way to connect wires in a circuit. The polyamide insulator has high electrical resistance, which protects your equipment by eliminating the risk of short circuits or current surges. You'll find components like this one commonly used in the railway industry, mechanical engineering and plant engineering.
As part of Phoenix Contact’s PT series, this terminal block makes use of the innovative CLIPLINE complete system. This allows you to bridge together multi-conductor and function terminals for a fully customised terminal block system that meets your needs. The push-in connection method is straightforward and uses up to 50% less insertion force, reducing wear and tear on insulators to ensure they have a long service life. As it’s suitable for use with wire gauges from 26 to 12AWG (0.14 to 4mm² CSA), this block is a versatile choice.

• CSA certification guarantees it meets the highest international standards of safety
• Rated for a maximum voltage of 500V to handle the demands of high-powered equipment with ease
• Flame-retardant thermoplastic housing protects against fire hazards

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.