Phoenix Contact QUINT POWER Switched Mode DIN Rail Power Supply, 85 → 264V ac ac Input, 48V dc dc Output, 5A

QUINT POWER generation maximizes the availability of your plant. With some featuring the SFB technology (Selective Fusebreaking Technology), the 6-times nominal current for 12 ms, can be the first time standard circuit breakers reliable and quick trigger. Faulty current paths are selectively shut down, the error is limited and important Plant parts remain in operation.

Selective Fusebreaking Technology (CRC Technology)
Worldwide use through wide-range input for DC and AC networks
Reliable start difficult loads with static power reserve POWER BOOST
High reliability through high MTBF> 500,000 h, long power failure bridging times > 20 ms, high voltage to 300 Vac
Preventive function monitoring DC-OK by professional signaling
Slim design
Conformal coating for extreme environments (Some models)

The QUINTPOWER power supply unit's feature terminal blocks on both the top & bottom of the unit. You'll need to strip 7mm length from your cable and insert it into the terminal blocks. A simple screw connection (M4 screw) will then lock your cable into the terminal block, providing an output or input connection. However, please follow all manafactuer installation instructions.

Typically these power supplies are mounted into cabinets and are used in industrial circumstances. They can be used for automation, machinery or any project that has modules that are mounted on DIN-rails.

665-7766, 665-7769, 665-7794 and 665-7790 do not feature SFB technology

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved, CSA, CB, ABS

Efficiently convert your electrical supply and safely power your equipment using this power supply from Phoenix Contact. The primary-switched unit takes AC (alternating current) and changes it to DC (direct current). The voltage is adjustable, so you can tailor it to your needs and, thanks to a power-boost function, it can reliably start heavy loads. Critical machines and circuits are protected through preventative monitoring that detects high currents and swiftly reports errors to your system. This is supported by the quick tripping of breakers when currents are six times higher than the nominal power.
As it's a DIN rail power supply with pluggable screw connections, this device is easy to install in your control cabinet, enclosure or rack. NFC (near field communication) technology simplifies setup and lets you control it from an app. An LED (light-emitting diode) status display makes it even more user-friendly.

• Long life of 500,000 hours reduces maintenance time
• Protective coating allows installation in extreme environments
• Meets European safety standard EN 50178 for power installations, so reliably protects against shock currents
• Wide operating temperature between -25°C and +70°C for use in harsh conditions