TE Connectivity, AD Plier Crimping Tool for MiniSeal Splices

  • RS Stock No. 444-5693
  • Mfr. Part No. AD-1377CRMPTOL3CVT-CS2065
  • Manufacturer TE Connectivity
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

TE Connectivity Mil Spec AD-1377 Hand Crimping Tool for MiniSeal Splices

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

TE Connectivity MiniSeal Handing Crimping Tool - Overview

From TE Connectivity, an easy to use hand operated crimping tool made from high-quality materials which meets Mil Spec MIL-DTL-22520/37-01 for crimping MiniSeal crimp splices. The crimping tool consists of handles and two crimping jaws. The crimping jaws contain three crimping chambers with clearly marked wire sizes. A locator helps position the terminal accurately during the crimping process. The crimping tool is supplied with a pre-set crimp depth to ensure that the correct combination of tensile strength and insulation integrity is achieved when crimping. A ratchet controlled release mechanism ensures that the handles of the crimp tool do not release until a full crimp cycle is achieved.

Key Features and Benefits

• Easy to use with a smooth operation
• Meets Mil Spec MIL-DTL-22520/37-01 standard
• Pre-set crimp depth ensures crimp integrity
• Ratchet controlled release mechanism ensures full crimp cycle
• Locator for accurate contact positioning
• Crimping cavities are polished for maximum crimping reliability
• Ergonomic design for operator comfort

Questions and Answers

What terminals can this tool be used with?
This hand crimping tool is used for crimping MiniSeal splices with a wire size range of 26 AWG to 12 AWG





TE Connectivity Hand Crimp Tools for Splice Terminals

Attribute Value
Series AD
Crimp Connector Type MiniSeal Splices
Crimp Tool Type Plier
For Use With Splices 10-22 AWG
Wire Size mm² 0.15 3.37mm²
76 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 328.23
(exc. GST)
$ 361.05
(inc. GST)
Per unit
1 +
Related Products
Crimping tools are used to join two pieced ...
Crimping tools are used to join two pieced of metal together by depressing one or both in to a crimp Often used for joining a connector to a cable. A full cycle ratcheting hand tool such as this one ensures ...
TE Terminal Cutter tool enables operators to easily ...
TE Terminal Cutter tool enables operators to easily cut side-feed, front-carrier terminal strips and reels This gives customers ability to create loose piece terminals with precision This avoids damaging products or creating sharp burs that are commonly associated with using ...
Molex Mini-Fit Sr Crimp Contacts & Tooling A ...
Molex Mini-Fit Sr Crimp Contacts & Tooling A range of male and female crimp contacts for use in Mini-Fit Sr connectors. The Mini-Fit Sr male crimp terminals are for use in Mini-Fit Sr cable and panel plug housings, see stock ...
BNC Tooling 473-0648 A high quality low cost ...
BNC Tooling 473-0648 A high quality low cost ratchet action crimp tool for terminating both 50Ω and 75Ω connector ranges such as BNC, TNC, UHF, mini UHF and SMA, groups A and C,Not suitable for BNC connectors utilising cable groups ...