FlexLink Beam Square Nut, strut profile 44 mm, Groove Size 11mm

  • RS Stock No. 331-4289
  • Mfr. Part No. XLAQ 8
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

T-slot Nuts XC, XF and XD

Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.

Specifications
Attribute Value
Structural Element Type Beam
Connector Type Square Nut
Fits Groove Size 11mm
Thread Size M8
Fits Strut Profile 44 mm
Product Family FlexLink
Material Steel
Product System XL
6 : Next working day (AU stock)
9 : 5 working days (Global stock)
Price (ex. GST) 1 Bag of 10
$ 21.18
(exc. GST)
$ 23.30
(inc. GST)
Bag(s)
Per Bag
Per unit*
1 - 5
$21.18
$2.118
6 - 24
$20.54
$2.054
25 +
$20.10
$2.01
*price indicative
Related Products
RS PRO offers this great tube connector that ...
Description:
RS PRO offers this great tube connector that fits 25 mm strut profile It provides structural strength to the joints and connections. No screws are required as these are simply pushed together into the correct square tubing. These are great ...
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam sideThrough hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...
Enables enclosure beam ends to be connected to ...
Description:
Enables enclosure beam ends to be connected to beam sides XD to XD, XD to XC and XF to XF,The connector is mounted directly onto the beam end with the M5 self-tapping screw.,When the connector is being fitted to the ...
The Flex Link Rotary Joint XC allows two ...
Description:
The Flex Link Rotary Joint XC allows two XC structural beams to be attached to each other, allowing one of the beams to swing The joint is intended for use in pairs, to avoid movement loads. The joint should be ...