FTDI Chip USB to Serial/Parallel Development Board, FT232H - UM232H

  • RS Stock No. 737-4695
  • Mfr. Part No. UM232H
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

UM232H USB to Serial UART Development Module, FTDI Chip

The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UM232H is a module designed to plug into a standard 0.6in wide 28-pin DIP socket. The USB connection to a host system is via a mini-B USB connector.

USB 2.0 Hi-Speed (480Mbits/s) and Full Speed (12Mbits/s) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Small USB Type B connector common on many commercial devices
USB bus or self-powered options
Asynchronous UART transfer data rate up to 12Mbaud
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
Fully assisted hardware or X-On / X-Off software handshaking
Auto-transmit buffer control for RS-485 applications
Supports a half duplex FT1248 interface with a bi-directional data bus (1, 2, 4 or 8 bits wide)
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
Support for USB suspend and resume
UHCI / OHCI / EHCI host controller compatible
FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
+2.97 to +5.25V single-supply operation

The FTDI UM232H is a single channel USB-to-serial/FIFO development module. It is based on the FT232H single channel USB UART/FICO device. The UM232H development module is the perfect tool for adding USB functionality to your project.

How does it connect?
The UM232H plugs straight into a 0.6inch wide, DIP-28 socket. It connects to the host via the on-board mini USB socket.

What is it used for?
The UM232H is ideal for integrating USB into an existing design. Example applications include; smart card readers, wireless modems, bar code readers and medical applications.

Specifications
Attribute Value
Kit Classification Development Board
Featured Device FT232H
On back order for despatch 27/10/2020, delivery within 7 working days from despatch date.
Price (ex. GST) Each
$ 30.10
(exc. GST)
$ 33.11
(inc. GST)
units
Per unit
1 +
$30.10
Related Products
LAN9252 EtherCAT® Slave Controller Evaluation Kit with HBI/SPI+GPIO ...
Description:
LAN9252 EtherCAT® Slave Controller Evaluation Kit with HBI/SPI+GPIO Interface The Microchip EVB-LAN9252-HBI+ LAN9252 EtherCAT® Slave Controller (ESC) Evaluation Kit is a development platform for you to explore the LAN9252 EtherCAT® IC The board supports HBI/SPI+GPIO interfaces.The EVB-LAN9252-HBI+ features dual ...
X-NUCLEO-IDB05A1 BLE Expansion Board for STM32 Nucleo The ...
Description:
X-NUCLEO-IDB05A1 BLE Expansion Board for STM32 Nucleo The STM32 F0 Series of the 32-bit Flash Microcontrollers (MCUs) is based on the ARM Cortex™-M0 core; a core specifically developed for embedded applications. STMicroelectronics’s STM32 ARM Cortex™ M processor benefits from the ...
ATA6629/ATA6631 Development Board The development board for Atmel ...
Description:
ATA6629/ATA6631 Development Board The development board for Atmel ATA6629/31 (ATA6629-EK, ATA6631-EK) devices is designed to give designers a quick start with the ICs and for prototyping and testing of new LIN designs The ATA6631 is a fully integrated LIN transceiver ...
Mikro Elektronika has designed a range of boards ...
Description:
Mikro Elektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, ...