890 piece E Type, External, Internal Steel Circlip Kit

  • RS Stock No. 523-165
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Black Steel

Black Phosphated Steel clips conform to the requirements of BS3673
Available in packs of individual sizes of External and 'E' types
Suitable RS circlip pliers available

Note

Two circlip kits are available separately
Kit 1 contains small sized clips
Kit 2 contains large sized clips in both cases
Each kit is contained in a moulded compartment storage box, complete with a layout sheet giving dimensional information

//media.rs-online.com/t_line/L0523165-10.gif
//media.rs-online.com/t_line/L289180-01.gif
//media.rs-online.com/t_line/LI523165-01.gif

RS PRO 890 Piece Steel Circlip Kit

RS PRO circlip kit which contains a range of circlips including E Type circlips, External circlips and Internal circlips.
Circlips (also known as retaining rings) are types of fastener which look like flexible, open-ended rings. Circlips are typically made from stainless steel and similar metals. Alternative names for circlips include retaining rings, retaining clips, C-type, Jesus clips, snap rings, and E-type.
Circlips come in two main types – internal and external. An external circlip is designed to fit around a bore, whereas internal circlips are made to fit inside a cylindrical shaft or housing.
It is always important to choose the right circlip sizes for the job at hand. The retaining ring must be suitable to fit inside the shaft where it will be installed (internal circlips) or should fit snugly around the outside of the housing (external circlips). If the retaining ring is incorrectly sized, the installation will be significantly more challenging, and it may lead to further problems in the future if left unchecked.

Features:

For 1.7 to 12 mm, 3 to 12 mm and 8 to 12 mm diameter shaft
Fits 1.17 to 8.96 mm, 2.8 to 11.5 mm and 8.4 to 12.5 mm diameter groove

Kit Contents:
External:-
3 mm x 75
4 mm x 70
5 mm x 65
6 mm x 60
8 mm x 50
10 mm x 30
12 mm x 30
Internal:-
8 mm x 40
10 mm x 30
12 mm x 30
'E' type:-
1.4 mm x 75
2 mm x 70
3 mm x 65
4 mm x 60
5 mm x 50
6 mm x 30
8 mm x 30
10 mm x 30

Typical Applications:

A circlip set will typically feature a selection of circlips. Sets usually include a variety of common sized retaining rings, alongside a range of internal, external, and E-clips to provide greater flexibility to the user.

Circlip kits are ideal for professionals regularly working with circlips of different types and sizes, a circlip kit is particularly handy if you are unsure what size circlip you will need for future applications.

FAQs
How Do You Measure External Circlip Size?
When measuring the size of an external circlip, you should measure the nominal size of the groove diameter. Do not measure the shaft diameter as this will result in an inaccurate measurement when comparing external circlip sizes.

How Do You Measure Internal Circlip Size?
To accurately measure the size of an internal circlip, you will need to measure the nominal size of the groove diameter. Avoid measuring the bore diameter as this will not provide the correct size.

Why RS PRO?
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.

Specifications
Attribute Value
Number of Pieces 890
Circlip Type E Type, External, Internal
For Shaft Diameters 1.7 → 12 mm, 3 → 12 mm, 8 → 12 mm
Fits Groove Diameter 1.17 → 8.96 mm, 2.8 → 11.5 mm, 8.4 → 12.5 mm
Material Steel
Fits Groove Diameter Maximum 8.96 mm, 11.5 mm, 12.5 mm
Fits Groove Diameter Minimum 1.17 mm, 2.8 mm, 8.4 mm
For Shaft Diameter Maximum 12mm
For Shaft Diameter Minimum 1.7 mm, 3 mm, 8 mm
Ring Thickness Maximum 1 mm, 1.1 mm, 12.5 mm
Ring Thickness Minimum 0.3 mm, 0.4 mm, 0.8 mm
6 : Next working day (AU stock)
66 : 7 working days (Global stock)
Price (ex. GST) Each
$ 78.04
(exc. GST)
$ 85.84
(inc. GST)
units
Per unit
1 +
$78.04
Related Products
Circlips Stainless Steel Stainless Steel circlips conform to ...
Description:
Circlips Stainless Steel Stainless Steel circlips conform to DIN 14122 (BSC SF 14) & also meet BS3673Available in packs of individual sizes of External and 'E' types Suitable RS circlip pliers available Note Two circlip kits are available Kit 1 ...
Black Steel Black Phosphated Steel clips conform to ...
Description:
Black Steel Black Phosphated Steel clips conform to the requirements of BS3673Available in packs of individual sizes of External and 'E' types Suitable RS circlip pliers available Note Two circlip kits are available separately Kit 1 contains small sized clips ...
Black Steel Black Phosphated Steel clips conform to ...
Description:
Black Steel Black Phosphated Steel clips conform to the requirements of BS3673Available in packs of individual sizes of External and 'E' types Suitable RS circlip pliers available Note Two circlip kits are available separately Kit 1 contains small sized clips ...
Open Style Made from enamelled steel Metric and ...
Description:
Open Style Made from enamelled steel Metric and imperial retainers available Available as packs of individual sizes or as a boxed kit, containing 50 of each size specified in the table Kit contained in a moulded compartment storage box Note ...