AC164112, Chip Programming Adapter Voltage Limiter for Microchip Header Board

  • RS Stock No. 667-7892
  • Mfr. Part No. AC164112
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

ICD 2 In-Circuit Debugger/Programmer Evaluation Kit

In-Circuit Debugger (ICD 2) allows the debugging of a range of PIC microcontrollers through the MPLAB® Integrated Development Environment (IDE). The ICD 2 module connects between the PC and the user's target board allowing direct in-circuit debugging of the target microcontroller in real time. A range of header interfaces is available to allow users to connect the ICD 2 to their target board IC socket where a suitable ICD modular connection is not available.

USB (full speed 2Mbits/sec) and RS-232 interface to host PC
Real-time background debugging
Firmware upgradable from the PC
Supports low voltage target systems (+2.0 to +6.0V)
Diagnostic LEDs (Power, Busy, Error)
Reading/Writing memory space and stack of target microcontroller
Freeze on halt

USB (full speed 2MB/second), RS-232 interface for host PC
Real-time background debugger
Firmware can be upgraded from PC
Supports low voltage target system (+2.0 to +6.0V)
Diagnostic LED(power, busy, error)
Read/write target microcontroller's memory space and stack
Freezes when paused

The ICD 2 uses MPLAB IDE (Integrated Development Environment) graphical user interface enabling various PIC microcontroller debuggers. It can be connected to PCs and user target boards with MPLAB ICD 2 modules and can directly connect with the target microcontroller in-circuit debugger in real time. A header interface is provided so by using this, the MPLAB ICD 2 can be connected to the target board IC socket when the suitable ICD module connection cannot be used.

Supplied with

Kit only: ICD interface cable, USB cable, RS-232 cable, PSU and PICDEM™ 2 Plus Demonstration Board - DV163022

Specifications
Attribute Value
Accessory Type Voltage Limiter
For Use With Microchip Header Board
7 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 17.89
(exc. GST)
$ 19.68
(inc. GST)
units
Per unit
1 +
$17.89
Related Products
The FlashBios is a device Reader/Programmer/Copier supporting CMOS ...
Description:
The FlashBios is a device Reader/Programmer/Copier supporting CMOS EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, IC ...
The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs ...
Description:
The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C and ...
From DISCERA, the Timeflash chip programming adaptor is ...
Description:
From DISCERA, the Timeflash chip programming adaptor is a simple Windows-based USB kit that allows you to custom program and verify any DSC8XXX programmable oscillator for any frequency with up to four decimal point resolution. CMOS, LVPECL, LVDS, and HCSL ...
From DISCERA, the Timeflash chip programming adaptor is ...
Description:
From DISCERA, the Timeflash chip programming adaptor is a simple Windows-based USB kit that allows you to custom program and verify any DSC8XXX programmable oscillator for any frequency with up to four decimal point resolution. CMOS, LVPECL, LVDS, and HCSL ...