INA Deep Groove Ball Bearing - Open End Type, 30mm I.D, 62mm O.D
- RS Stock No.:
- 191-3842
- Mfr. Part No.:
- 6206-C3
- Manufacturer:
- INA
View all Ball Bearings
On back order for despatch 28/04/2023, delivery within 10 working days from despatch date.
Price (ex. GST) Each
Was $18.71
You pay
$15.90
(exc. GST)
$17.49
(inc. GST)
| units | Per unit |
| 1 - 12 | $15.90 |
| 13 - 24 | $15.48 |
| 25 + | $15.06 |
- RS Stock No.:
- 191-3842
- Mfr. Part No.:
- 6206-C3
- Manufacturer:
- INA
Technical data sheets
Legislation and Compliance
Product Details
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
Specifications
| Attribute | Value |
| Inside Diameter | 30mm |
| Outside Diameter | 62mm |
| Ball Bearing Type | Deep Groove |
| Race Width | 16mm |
| End Type | Open |
| Number of Rows | 1 |
| Static Load Rating | 11300N |
| Cage Material | Sheet Steel |
| Race Type | Plain |
| Dynamic Load Rating | 20800N |
| Bore Type | Parallel |