MCP3913A1-E/SS, Analogue Front End, 6-Channel 24 bit SPI, 28-Pin SSOP

  • RS Stock No. 177-1640
  • Mfr. Part No. MCP3913A1-E/SS
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The MCP3913 device is a 3V six-channel Analog Front End (AFE, containing six synchronous sampling delta-sigma ADCs, six PGAs, phase delay compensation block, low-drift internal voltage reference, digital offset and gain error calibration registers, and high-speed 20 MHz SPI compatible serial interface.

Six Synchronous Sampling 24-bit Delta-Sigma ADCs
94.5 dB SINAD, -107 dBc Total Harmonic Distortion (THD) (up to 35th Harmonic), 112 dBFS SFDR for Each Channel
Enables 0.1% Typical Active Power Measurement Error over a 10,000:1 Dynamic Range
Advanced Security Features: - 16-bit Cyclic Redundancy Check (CRC) checksum - 16-bit CRC checksum and interrupt alert for register map configuration - Register map lock with 8-bit secure key
Programmable Data Rate up to 125 ksps
Oversampling Ratio up to 4096
Ultra-Low Power

Specifications
Attribute Value
Resolution 24 bit
Interface Type SPI
Number of Channels per Chip 6
Mounting Type Surface Mount
Package Type SSOP
Pin Count 28
Dimensions 10.5 x 5.6 x 2mm
Height 2mm
Length 10.5mm
Maximum Operating Supply Voltage 3.6 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Width 5.6mm
Minimum Operating Supply Voltage 2.7 V
Automotive Standard AEC-Q100
141 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Tube of 47)
$ 5.414
(exc. GST)
$ 5.955
(inc. GST)
units
Per unit
Per Tube*
47 - 47
$5.414
$254.458
94 +
$5.147
$241.909
*price indicative
Related Products
The Texas Instruments AFE4403 analogue front-end (AFE) is ...
Description:
The Texas Instruments AFE4403 analogue front-end (AFE) is designed specifically for heart rate monitoring and pulse oximetering It is composed of a low noise receiver channel, ADC, oscillator and dual LED driver with integrated fault detection. Connect an external microcontroller ...
Replaces Potentiometers In New Designs10K, 50K & 100K ...
Description:
Replaces Potentiometers In New Designs10K, 50K & 100K Ω End-to-End Terminal Resistances+27 to +5.5 V Single-Supply±3 V Dual Supply3-Wire SPI Compatible Serial Data Input and Output Specified for Operation: -40°C to 125°CApplications Mechanical Potentiometer Replacement Stereo Channel Audio Level Control ...
The Microchip MCP48FVB21/22 family are 12-bit voltage output ...
Description:
The Microchip MCP48FVB21/22 family are 12-bit voltage output Digital-to-Analogue Converters (DACs) that offer high performance with low power consumption and fast settling time Featured on-board is Volatile Memory and a SPI Interface that supports write commands up to 20 MHz ...
The Microchip MCP48FEB11/12 family are 10-bit voltage output ...
Description:
The Microchip MCP48FEB11/12 family are 10-bit voltage output Digital-to-Analogue Converters (DACs) that offer high performance with low power consumption and fast settling time On-board Non-Volatile EEPROM can save DAC settings during power down; four different Voltage Reference options are available. ...