LCBSBM-5-01A2-RT, 7.9mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base

  • RS Stock No. 721-4714
  • Mfr. Part No. LCBSBM-5-01A2-RT
  • Manufacturer Richco
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Miniature Adhesive Backed Supports

PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm

Specifications
Attribute Value
Overall Height 16.6mm
Body Height 7.9mm
Support Base Dimensions 12.7 x 12.7mm
PCB Hole Diameter 3.18mm
PCB Thickness 1.57mm
Material Nylon
Support Base Length 12.7mm
Support Base Width 12.7mm
480 In stock for delivery within 1 working day(s)
Price (ex. GST) Each (In a Pack of 40)
$ 0.29
(exc. GST)
$ 0.32
(inc. GST)
units
Per unit
Per Pack*
40 - 360
$0.29
$11.60
400 - 760
$0.286
$11.44
800 - 1960
$0.283
$11.32
2000 +
$0.274
$10.96
*price indicative
Related Products
Blind Hole Fixing Spacers Blind hole fixing spacers ...
Description:
Blind Hole Fixing Spacers Blind hole fixing spacers in Nylon 6//6 designed to fit a 79mm hole, with varying stand-off heights. The specifically designed blunt tip allows for maximum grip in the blind hole whilst significantly reducing protrusion in pass-through ...
RS Pro PCB Mounting Kit The RS Pro ...
Description:
RS Pro PCB Mounting Kit The RS Pro PCB mounting kits has been designed to prevent your board from flexing or experiencing too much stress Installing one threaded spacer at each end under the expansion board and the pan head ...
Spacers for PCB FLCBS model: flexible spacers for ...
Description:
Spacers for PCB FLCBS model: flexible spacers for printed circuit boards to facilitate access to the underside of the board for marking or maintenance FLCBS model: flexible spacers for printed circuit boards to facilitate access to the underside of the ...
Reverse Locking PCB Pillars Nylon PCB support pillars ...
Description:
Reverse Locking PCB Pillars Nylon PCB support pillars in various heights This type snaps into place on both the chassis and the board and requires no fixing screws. Can be released by hand Material: Nylon 66Colour: Natural Minimal protrusion of ...