CRC PRIME IT Spray Aerosol Adhesive Primer for use with Iron, Steel, 400 ml

The CRC Prime It Red Oxide Primer is a single pack penetrating shop primer with a red-oxide finish and high levels of anti-corrosive zinc complexes. It forms a durable protective coating on steel with excellent anti-corrosive properties. It is formulated for the protection of structural steel and iron and can be applied over clean or lightly rusted surfaces. It does not require immediate over coating, but can be over coated at a later stage if desired. Ongoing protection can be achieved through over coating or simple recoating with CRC Prime It.

Zinc enriched for corrosion protection
High levels of anti-corrosive zinc complexes
Embedded in a protective enamel coating
Excellent adhesive qualities
Forms a tough coat for long-term protection
Heat Resistance Up to 120°C
Fast drying
Easy re-application over existing film
Single coat, No over coating required.

Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply with smooth even strokes to clean, dry surface holding can approximately 25cm from surface until desired coverage is achieve