Accelerometer Sensors

What is an Accelerometer Sensor?An accelerometer is an integrated, built-in module or circuit that accurately detects and measures the acceleration and motion of the application it is attached too. The type of measurement they measure is the rate of velocity change in an object and commonly measure in G-forces (g) or in meters per second squared (m/s2). How do Accelerometer Sensors work?This particular type of sensor is used to measure static (gravity) or dynamic forces (vibration and motion) in acceleration. An accelerometer can measure acceleration on up to three axis units. These acceleration sensors usually contain internal capacitive plates, some are fixed whilst others are attached to very small springs. These internally move as acceleration forces are happening on the sensor. When these plates move, the capacitance changes between them and from these changes, the acceleration can be determined. Another type of accelerometers, is a Piezoelectric Accelerometer. These sensors contain minuscule crystal structures that output electrical charge if they ever fall under a mechanical stress, in this instance the stress would be acceleration.What are Accelerometer Sensors used for? Gaming systems Mobile devices Disk drive protection Image stabilisation Sports and health devices Industrial applications Commercial applicationsDid you know?Did you know that a single G-force on planet earth amounts to 9.8 m/s2. This figure can vary, depending on elevation and will be different on other planets because of the difference in gravitational pull.

...
Read more Read less

Filters

Viewing 41 - 60 of 208 products
Results per page
Description Price Sensor Type Number of Axis Technology Mounting Type Interface Type Maximum Frequency Response Minimum Frequency Response Maximum Operating Supply Voltage Minimum Operating Supply Voltage Package Type Sensitivity Pin Count Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 145-8888
Mfr. Part No.LIS2DH12TR
$1.277
Each (On a Reel of 1000)
units
Accelerometer 3 Digital Surface Mount I2C, SPI 10 (SPI) MHz, 400 (SCL) kHz 0 (SCL)kHz 3.6 V 1.71 V LGA 192mg/digit 12 +85 °C -40 °C
RS Stock No. 799-9187
Mfr. Part No.SCA100T-D07-004
BrandMurata
$124.45
Each
units
Accelerometer 2 Analogue Surface Mount SPI 550Hz 250Hz 5.25 V 4.75 V SMD 0.17V/g 12 +125 °C -40 °C
RS Stock No. 166-1059
Mfr. Part No.IIS328DQTR
$5.962
Each (On a Reel of 2500)
units
Accelerometer 3 Analogue, Digital Surface Mount Serial-3 Wire, Serial-4 Wire, Serial-I2C, Serial-SPI - - 3.6 V 2.16 V QFPN 4.3mg/digit 24 +105 °C -40 °C
RS Stock No. 878-7465
Mfr. Part No.LIS2DH12TR
$1.74
Each (In a Pack of 10)
units
Accelerometer 3 Digital Surface Mount I2C, SPI 10 (SPI) MHz, 400 (SCL) kHz 0 (SCL)kHz 3.6 V 1.71 V LGA 192mg/digit 12 +85 °C -40 °C
RS Stock No. 893-7266
Mfr. Part No.805-0050-01
$172.08
Each
units
Accelerometer - - Through Hole 2 Wire IEPE 10000Hz 0.3Hz 30 V dc 18 V TO-5 100mV/g 3 +100 °C -40 °C
RS Stock No. 752-2324
Mfr. Part No.MMA2204KEGR2
BrandNXP
$16.37
Each
units
Accelerometer 1 Analogue Surface Mount - 440Hz 360Hz 5.25 V 4.75 V SOIC 21mV/g 16 +125 °C -40 °C
RS Stock No. 160-0660
Mfr. Part No.ADIS16265BCCZ
$164.069
Each (In a Tray of 176)
units
Gyroscope 1 Digital Surface Mount SPI 330Hz - 5.25 V 4.75 V LGA 0.07326°/s/LSB 20 +105 °C -40 °C
RS Stock No. 146-2373
Mfr. Part No.805-0050-01
$144.913
Each (In a Box of 20)
units
Accelerometer - - Through Hole 2 Wire IEPE 10000Hz 0.3Hz 30 V dc 18 V TO-5 100mV/g 3 +100 °C -40 °C
RS Stock No. 496-7581
Mfr. Part No.ADXL103CE
$36.83
Each
units
Accelerometer 1 - Surface Mount - - - 6 V 3 V CLCC 1040mV/g 8 +125 °C -40 °C
RS Stock No. 412-787
Mfr. Part No.ADXL203CE
$43.40
Each
units
Accelerometer 2 - Surface Mount - - - 6 V 3 V CLCC 1040mV/g 8 +125 °C -40 °C
RS Stock No. 922-7431
Mfr. Part No.MMA3202KEG
BrandNXP
$12.704
Each (In a Tube of 38)
units
Accelerometer 2 Analogue Surface Mount - 440Hz 360Hz 5.25 V 4.75 V SOIC 21 (x) mV/g, 42 (y) mV/g 20 +125 °C -40 °C
RS Stock No. 798-9981
Mfr. Part No.ADXL363BCCZ-RL7
$14.51
Each
units
Accelerometer, Temperature Sensor 3 Analogue Surface Mount SPI 250kHz 100Hz 3.5 V 1.6 V LGA 1mg/LSB 16 +85 °C -40 °C
RS Stock No. 819-7278
Mfr. Part No.AD22293Z
$42.25
Each
units
Accelerometer 2 Analogue Surface Mount - - - 6 V 3 V CLCC 331mV/g 8 +125 °C -40 °C
RS Stock No. 912-7274
Mfr. Part No.ADXL203CE
$35.643
Each (In a Tube of 95)
units
Accelerometer 2 - Surface Mount - - - 6 V 3 V CLCC 1040mV/g 8 +125 °C -40 °C
RS Stock No. 922-7526
Mfr. Part No.MMA8452QT
BrandNXP
$1.513
Each (In a Tray of 2450)
units
Accelerometer 3 Digital Surface Mount Serial-I2C 400kHz 0kHz 3.6 V 1.95 V QFN 256 Counts/g, 512 Counts/g, 1024 Counts/g 16 +85 °C -40 °C
RS Stock No. 849-6175
Mfr. Part No.0273.141.148-1NV
$2.618
Each (In a Pack of 5)
units
Accelerometer 3 Digital Surface Mount I2C, SPI 10MHz - 3.6 V 1.2 V LGA 4096LSB/g 12 +85 °C -40 °C
RS Stock No. 912-6508
Mfr. Part No.ADXL327BCPZ
$5.591
Each (In a Tray of 490)
units
Accelerometer 3 - Surface Mount - - - 3.6 V 1.8 V LFCSP 462mV/g 16 +85 °C -40 °C
RS Stock No. 752-2355
Mfr. Part No.MMA3202KEG
BrandNXP
$14.00
Each
units
Accelerometer 2 Analogue Surface Mount - 440Hz 360Hz 5.25 V 4.75 V SOIC 21 (x) mV/g, 42 (y) mV/g 20 +125 °C -40 °C
RS Stock No. 169-7318
Mfr. Part No.MMA8451QT
BrandNXP
$2.471
Each (In a Tray of 490)
units
Accelerometer 3 Digital Surface Mount Serial-I2C - - 3.6 V 1.95 V QFN 4096Counts/g 16 +85 °C -40 °C
RS Stock No. 161-0548
Mfr. Part No.ADXL213AE
$42.434
Each (In a Tube of 95)
units
Accelerometer 2 - Surface Mount - - - 6 V 3 V CLCC 33mV/g 8 +85 °C -40 °C
Related Products
MEMS accelerometers and i Sensor MEMS accelerometer subsystems ...
Description:
MEMS accelerometers and i Sensor MEMS accelerometer subsystems from Analog Devices to accurately detect and measure acceleration, tilt, shock and vibration in performance-driven applications Signal conditioning technology is integrated into every MEMS accelerometer, gyroscope, inertial measurement unit (IMU) from ...
MEMS accelerometers and i Sensor MEMS accelerometer subsystems ...
Description:
MEMS accelerometers and i Sensor MEMS accelerometer subsystems from Analog Devices to accurately detect and measure acceleration, tilt, shock and vibration in performance-driven applications Signal conditioning technology is integrated into every MEMS accelerometer, gyroscope, inertial measurement unit (IMU) from ...
MEMS accelerometers have 2-axes to detect changes in ...
Description:
MEMS accelerometers have 2-axes to detect changes in force resulting from fall, tilt, motion, positioning, shock and vibration Fast response time High sensitivity Low current consumption Low voltage operation Standby mode Small profile package.
MEMS accelerometers have 3-axes (X, Y, Z) to ...
Description:
MEMS accelerometers have 3-axes (X, Y, Z) to detect changes in force resulting from fall, tilt, motion, positioning, shock and vibration Fast response time High sensitivity Low current consumption Low voltage operation Standby mode Small profile package.