Hydraulic Flow Control Valves - CETOP Mounting

Filters

Viewing 1 - 4 of 4 products
Results per page
Description Price Manufacturer Series CETOP Mounting Connection Port Thread Number of Ports Power Supply Voltage Maximum Operating Pressure Maximum Flow Rate Minimum Operating Temperature Maximum Operating Temperature Thread Standard Thread Size
RS Stock No. 704-0320
Mfr. Part No.R933003835
$490.10
Each
units
R93 - G 1/2 6-way 12V dc 300 bar 90L/min - - G 1/2in
RS Stock No. 134-7057
Mfr. Part No.ZNS-AB01-5-S0-D1
BrandParker
$968.56
Each
units
ZNS CETOP 3 - - - 350 bar - -20°C +60°C - -
RS Stock No. 134-7056
Mfr. Part No.ZNS-AB01-2-S0-D1
BrandParker
$968.56
Each
units
ZNS CETOP 3 - - - 350 bar - -20°C +60°C - -
RS Stock No. 134-7053
Mfr. Part No.ZNS-A01-5-S0-D1
BrandParker
$595.14
Each
units
ZNS CETOP 3 - 1-Way - 350 bar - -20°C +60°C - -
Related Products
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
Valves offering simple and accurate speed control and ...
Description:
Valves offering simple and accurate speed control and flow regulation. Easy to read flow graduation scale, with position locking screw Built in safety stop prevents unintentional withdrawal of the handwheelRetaining nut included to enable panel mountingNitrile rubber seals0.5 bar cracking ...
Enerpac’s V-66 manually operate check valves are for ...
Description:
Enerpac’s V-66 manually operate check valves are for use with both double and single acting cylinders. Used for load holding applications the check valve only allows oil to flow to the piston during operation. Oil can flow back to the ...
High pressure flow control valves for general purpose ...
Description:
High pressure flow control valves for general purpose use in a hydraulic system.Easy to read colour flow graduation scale and a locking screw to stabilise flowNitrile rubber sealsTemp. range -10 to +100°C0.5 bar cracking pressure.