Non-Resettable Wire Ended Fuses

Non-resettable wire ended fuses are a type of single use circuit protection device that are can be soldered onto printed circuit boards or carriers. This category encompasses any type of single-use fuse that consist of a fuse body with two wires extended outside of the body.

How do non-resettable wire ended fuses work?

Non-resettable wire ended fuses form part of a circuit and allow an electrical current to flow through them. When a fault such as overcurrent or a short circuit is detected, the metal strip in the fuse body will melt, breaking the circuit and preventing damage. This type of fuse must be replaced after it has blown.

Types of non-resettable wire ended fuses

Non-resettable wire ended fuses differ broadly, mainly in their shape. The fuse body can be a short, fat cylinder or a longer, thinner one, and the wires may extend in parallel both from the same side of the fuse, or in opposite directions from either side of the fuse body. They also differ in their current and voltage rating, and the range of their operating temperature.


...
Read more Read less

Filters

Viewing 61 - 80 of 567 products
Results per page
Description Price Current Rating Lead Orientation Voltage Rating Fuse Speed Body Material Body Diameter Body Length Body Width Body Height Wire Length Wire Pitch Breaking Capacity at Maximum Voltage Rating Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 767-5128
BrandRS PRO
$0.247
Each (In a Pack of 10)
units
2A Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 764-9567
BrandRS PRO
$0.851
Each (In a Pack of 10)
units
3.5A Axial 250V ac T Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac/125 V dc -55°C +125°C
RS Stock No. 764-9536
BrandRS PRO
$0.331
Each (In a Pack of 10)
units
500mA Axial 250V ac T Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac/125 V dc -55°C +125°C
RS Stock No. 764-9497
BrandRS PRO
$0.421
Each (In a Pack of 10)
units
6.3A Axial 125V ac/dc FF Epoxy Coated 2.65mm - - 7.1mm 28mm - 300 A @ 125 V dc, 50 A @ 125 V ac -55°C +125°C
RS Stock No. 764-9475
BrandRS PRO
$0.199
Each (In a Pack of 10)
units
2A Axial 125V ac/dc FF Epoxy Coated 2.65mm - - 7.1mm 28mm - 300 A @ 125 V dc, 50 A @ 125 V ac -55°C +125°C
RS Stock No. 764-9485
BrandRS PRO
$0.165
Each (In a Pack of 10)
units
4A Axial 125V ac/dc FF Epoxy Coated 2.65mm - - 7.1mm 28mm - 300 A @ 125 V dc, 50 A @ 125 V ac -55°C +125°C
RS Stock No. 764-9602
BrandRS PRO
$0.811
Each (In a Pack of 10)
units
4A Axial 250V ac FF Epoxy Coated 3.18mm - - 7.1mm 28mm - 50 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5171
BrandRS PRO
$1.015
Each (In a Pack of 10)
units
250mA Radial 250V - Thermoplastic 8.35 - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 911-3512
BrandRS PRO
$0.463
Each (In a Pack of 10)
units
250mA - 250V ac T Ceramic 5mm 20mm - - 40mm - 1500 A at 250 V ac -55°C +125°C
RS Stock No. 767-5210
BrandRS PRO
$0.357
Each (In a Pack of 10)
units
2.5A Radial 250V - Thermoplastic 8.35mm - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5190
BrandRS PRO
$0.507
Each (In a Pack of 10)
units
200mA Radial 250V - Thermoplastic 8.35mm - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5074
BrandRS PRO
$0.712
Each (In a Pack of 10)
units
100mA Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5099
BrandRS PRO
$0.289
Each (In a Pack of 10)
units
250mA Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5193
BrandRS PRO
$0.681
Each (In a Pack of 10)
units
250mA Radial 250V - Thermoplastic 8.35mm - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5229
BrandRS PRO
$0.88
Each (In a Pack of 10)
units
3.15A Radial 250V - Thermoplastic 8.35mm - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 611-0614
BrandRS PRO
$1.501
Each (In a Pack of 10)
units
2.5A Radial 250V ac T Nylon 8.5mm - - 8mm 4.3mm 5.08mm 35 A -40°C +85°C
RS Stock No. 767-5213
BrandRS PRO
$0.545
Each (In a Pack of 10)
units
1.6A Radial 250V - Thermoplastic 8.35mm - - 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5049
BrandRS PRO
$0.397
Each (In a Pack of 10)
units
1A Radial 250V T Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 767-5080
BrandRS PRO
$0.216
Each (In a Pack of 10)
units
200mA Radial 250V - Thermoplastic - 8.35mm 4.3mm 7.7mm 4.3 mm, 22 mm 5.08mm 35 A @ 250 V ac -55°C +125°C
RS Stock No. 174-7955
BrandRS PRO
$523.20
1 Box of 1000
Box(es)
1.25A - 250V - - - - - - - - - - -
Related Products
Cooper Bussmann SS-5 Series Cooper Bussmann SS-5 series ...
Description:
Cooper Bussmann SS-5 Series Cooper Bussmann SS-5 series time-delay subminiature fuses are an ideal PCB fuse solution and can be used within a wide variety of applications Time-delay, low breaking capacity Small rectangular-leaded design minimizes PCB space. Cooper Bussmann SS-5 ...
172593 series fuses Axial component fuses designed for ...
Description:
172593 series fuses Axial component fuses designed for direct mounting on PCBFast-acting 3.6 x 10 mm fuses.High breaking capacity. Approvals UL and CSA. All fuses have Thermoplaste Polyamide bodies. Axial component fuses designed for direct mounting on PCB.Fast-acting 3.6 x ...
Microfuse fuses - MSF and MST series Miniature ...
Description:
Microfuse fuses - MSF and MST series Miniature fuses for soldering onto PCB or carriersFast-acting (MSF) or time-delay (MST) fuses. Low breaking capacity. Standards EN 60127, IEC 127-3//3, DIN-VDE 0820. The Schurter radial F leaded is designed for direct solder ...
High Performance, Series TR5 For automatic insertion, can ...
Description:
High Performance, Series TR5 For automatic insertion, can be directly soldered or plugged (use fuseholder stock no110-7900). All fuses have Thermoplaste Polyamide bodies. For automatic insertion, can be directly soldered or plugged (use fuseholder stock no.110-7900).