Schneider Electric Push Button Pendant Station

Use this push button pendant station from Schneider Electric to control hoist motors in your industrial workplace. It has an up and down button to manually operate lifting equipment and conveyors, as well as an emergency stop button to stop the machine quickly in a hazardous situation. Thanks to its mechanical safety interlock feature, you can link this unit with the guard doors of your equipment so it won't operate in unsafe conditions. As its polypropylene housing is resistant to impact and abrasion, this is a reliable option that delivers long-term performance in harsh environments.

• Double insulated control station to protect you from electric shocks
• IP65 rating shows that it's dustproof and can withstand low-pressure water jets
• Screw termination method is simple and doesn't need complex tools
• Yellow colour makes it easily identifiable in industrial settings
• Mechanical service life of 3,000,000 operating cycles for longevity

• Material handling equipment
• Construction sites

This unit can perform optimally in a temperature range of -25°C to +70°C, making it suitable for use in challenging environments.

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support