Schneider Electric 3PDT Push Button Pendant Station

Use this pendant control station from Schneider Electric to operate your single-speed motors. It comes with two large push buttons and one electric stop button for quickly passing commands to the controlled device. The robust aluminium housing is resistant to both impact and corrosion, so it's durable and suited to damp environments. This device has a rated impulse withstand voltage of 6kV, which means it can resist sudden voltage spikes without damaging your application. A screw termination method means it's quick to install without the need for complex tools.

• Mechanical service life of 1 million cycles for long-term performance
• Current rating of 10A for energy efficiency and use in high-voltage applications
• Wide operating temperature range of -25°C to +70°C, so suited to harsh industrial environments
• IP65 rating means it's shielded from dust and low-pressure water jets from all directions

• Magnetic locks
• Industrial cranes

This device is double insulated so it protects you from electric shocks and can be used in very hot environments.

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support