Lantronix XPCW1001000RP-K 3.3V WiFi Module, ARP, Auto-IP, DHCP, DNS, ICMP, TCP/IP, UDP/IP

  • RS Stock No. 817-6427
  • Mfr. Part No. XPCW1001000RP-K
  • Manufacturer Lantronix
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

xPico WiFi Raspberry Pi Plate

The Lantronix xPico WiFi Raspberry Pi Plate brings powerful WiFi connectivity to any Raspberry Pi-based project. Based on the xPico WiFi Embedded Device Server Module, the Plate can be set up as a Soft Access Point (AP) and/or as a Client server providing WiFi communication with an AP for a mobile device.

XPCW1001000RP-K xPico WiFi Raspberry Pi Plate
Compatible with the Raspberry Pi 1 Single-Board Computer
XPW100100B-01 xPico WiFi Module
Connector for Raspberry Pi GPIO 26-pin header
MiniUSB Device socket
MiniUSB socket for UART-USB bridge connection
SMA antenna connector
Current monitoring header
Set Default pushbutton
Reset pushbutton
Wake-Up pushbutton
Status LED
AP association LED
Power LED
Power supplied from Raspberry Pi or USB connection

XPW100100B-01 xPico WiFi Module
IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
IEEE 802.11 d/h/i/j/k/w/r
WPS 2.0 support
Security: IEEE 802.11i support: WPA-Personal, WPA2-Personal
AES-256 encryption
Soft Access Point with DHCP server and Client Mode
Lantronix SmartRoam™ Technology
QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points
Complete device server application with full IP Stack and web server
Embedded Network Protocols: TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1
ARM Cortex-M3 core processor with 1MB Flash memory, 128KB SRAM
1MB serial SPI Flash memory
Dual UART serial port with data rate of up to 921kbps
SPI bus with 20MHz clock rate
USB 2.0 full rate device mode
u.FL connector for external antenna
Power supply: +3.3Vdc
Low power (6μA Standby)
Dimensions: 24 x 16.5 x 5.64mm
Operating temperature range: -40 to +85°C
Certifications: FCC Class B, UL and EN EMC, Japan
Applications: Local communication for the Internet-of-Things (IoT)

Note

xPico WiFi module available separately under RS Part No. 797-6686

Supplied with

2dBi swivel-type antenna

Specifications
Attribute Value
Supported Protocol ARP, Auto-IP, DHCP, DNS, ICMP, TCP/IP, UDP/IP
Supported Security Standards WPA, WPA2
Supported Bus Interfaces A serial CMOS Ports, Lantronix tunneling application, SPI, 300 to 921.6 Kbps
Supply Voltage 3.3V
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
2 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 123.73
(exc. GST)
$ 136.10
(inc. GST)
units
Per unit
1 +
$123.73
Related Products
The Wizard Gecko WGM110 Wi Fi module is ...
Description:
The Wizard Gecko WGM110 Wi Fi module is designed for high data-rate wireless connectivity over a long distance using the IEEE 80211b/g/n protocol. RF Frequency Range: 2412 to 2472MHz ISM Band No. of Channels: 13 (Client Mode), 11 (AP Mode)RF ...
6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) ...
Description:
6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) refers to a communication protocol for transmission of IPv6 packets over energy-saving wireless networks As a basis for radio communication here thestandard IEEE 802.15.4 (PHY and MAC) is served like it is ...
ROHM's BP3591 IEEE80211b/g/n wireless LAN module performs all ...
Description:
ROHM's BP3591 IEEE80211b/g/n wireless LAN module performs all LAN protocol processing Includes WPS/WPA-PSK, and WPA2-PSK, significantly lightening host load The unit integrate a PCP/IP protocol stack that eliminates the need for device driver development Maximum Data Rate 72.2Mbps @ 2.4GHz ...
IEEE80211b/g/n Wireless LAN Module with integrated Flash Memory ...
Description:
IEEE80211b/g/n Wireless LAN Module with integrated Flash Memory Built-in Antenna Frequency band 2400MHz to 2483.5MHz (channel1 to channel13)4Mbit Flash memory (SPI)Built-in EEPROMTCP/IP protocol stack Security features: 64bit/128bit WEP, TKIP, AESUSB 2.0, SDIO, UART (up to 921600bps)Power supply 3.3V.