WEPTECH A001-0041-001 1.8 → 3.8V COUA 6LoWPAN Module, 802.15.4 GPIO

  • RS Stock No. 144-2596
  • Mfr. Part No. A001-0041-001
  • Manufacturer WEPTECH
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) refers to a communication protocol for transmission of IPv6 packets over energy-saving wireless networks. As a basis for radio communication here thestandard IEEE 802.15.4 (PHY and MAC) is served like it is also used at ZigBee and WirelessHART. Radio links can be realized in the frequency bands 868 and 915 MHz as well as 2.4 GHz. 6LoWPAN is specified by a working group of the IETF. There appropriate proposals have been created, for example, for the compression of IPv6 header (RFC6282). Together with appropriate routing procedures - which are also specified in the IETF - this technology permits the construction of meshed networks consisting of small, wirelessly communicating, low-power devices.Using appropriate gateways they can be integrated into the global IP network - a big step towards the "Internet of Things".

Tall package size: higher storage capacity
Small size for SMD mounting
1.8 – 3.8 V supply voltage
Ultra low power modes: - RX: 5.5mA
Sleep-Mode: 185nA
Output power:+14dBm
Powerful ARM Cortex-M3
128kB Flash/ 20KB SRAM
All Digital Peripheral Pins can be routed to any GPIO
Supported by the open source platform Contiki/ 6LoWPAN

The COUA module is a single embedded and cost-effective Sub-1-GHz radio module. With 5,5 mA, the module stands out due to a very low RX current consumption and an even lower sleep current. The radio module is supported by the open source operating system Contiki, which allows for rapid product development on the basis of the wide range of protocols and applications that Contiki offers. All available IOs are routed to the outside, so that various sensor and actuator applications can easily be realized.

Specifications
Attribute Value
Supported Protocol 802.15.4
Supported Bus Interfaces GPIO
Supply Voltage 1.8 → 3.8V
Length 15mm
Width 15mm
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 25.30
(exc. GST)
$ 27.83
(inc. GST)
units
Per unit
1 +
$25.30
Related Products
QFM-TRX1-24G 24GHz Transceiver Module The QFM-TRX1-24G is a ...
Description:
QFM-TRX1-24G 24GHz Transceiver Module The QFM-TRX1-24G is a radio telemetry transceiver module operating in the 2.4GHz ISM frequency band. It is based on the Texas Instruments CC2500 transceiver device. RF Carrier Frequency: 2400MHz to 2483MHz ISM BandRF Output Power: up ...
XBee Embedded Wi-Fi Module XBee Embedded Wi-Fi transceiver ...
Description:
XBee Embedded Wi-Fi Module XBee Embedded Wi-Fi transceiver modules are IEEE 80211b/g/n compliant, providing wireless connectivity to an project via serial UART/SPI interfaces. Using SoftAP Provisioning mode, any Smartphone or Tablet with a web browser can connect to the XBee ...
Wi Link8 Wi Fi SiP Modules A range ...
Description:
Wi Link8 Wi Fi SiP Modules A range of 24GHz wireless communication System-in-Package modules providing IEEE 802.11b/g/n (WG7801-D0, WG7831-D0, WG7831-DELF) and Bluetooth 4.0 (WG7831-D0, WG7831-DELF only). WG7801-D0 (RS Part No 841-2495)2.4GHz 802.11b/g/n Wi Fi module based on WL1801 SoCSDIO 1.8V ...
Delivering seamless and secure Ethernet, Wi-Fi and Bluetooth ...
Description:
Delivering seamless and secure Ethernet, Wi-Fi and Bluetooth connectivity, Lantronix x Pico 200 series allows OEMS to build and deploy their smart connected products with reduced complexity and lower risk Dual-band Wi-Fi (802.11 a/b/g/n) and Ethernetx Pico 250 Only – ...