Phase angle controller/SSR in one package. Ideal for any soft start / stop application requiring load control at multiple power levels for example heating elements, lamp brightness or motor speed (e.g. of a fan). The custom MCS / PC SSR provides the same ramp function as the standard MCS series, but an additional phase control function was added to the relay. The customer can therefore specify the amount of power they want applied to the load, then gradually ramp to that setting. If the power level is adjusted during operation, the relay will then gradually ramp to that new setting.
Provides a portion of each AC sine wave to control the amount of power delivered to an electrical load, with the percentage of power delivered determined by the input value Reduced wiring and components in the panel saves time, cost and space 0 - 100% control range Output status LED (Load Open, No Voltage) Separate Output Enable/Disable control SCR output
Note
Heat sink not included. For load current de-rating and heat sink details see manufacturers datasheet
Proportional and Power
Note
Temperature can affect current rating; please consult the data sheet for potential derating.
