Burkert Solenoid Valve 125304, 2 port , NC, 230 V ac, 1/4in

  • RS Stock No. 306-9939
  • Mfr. Part No. 125304
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Burkert Solenoid Valve

The Burkert 6013 series 1/4in G female solenoid valve has a supply voltage rating of 230VAC. This 2-port NC position valve is a vibration-proof, bolted coil system and has high-quality seal material FKM as standard. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak tightness. The maximum opening and closing time of the valve is 20 milliseconds and 30 milliseconds. It is suitable with compressed air, natural gas, water and hydraulic oil.
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Features and Benefits

Maximum working pressure is 10bar
Brass body with a polyamide coil
Coil can be changed easily with valve in place
Coil can be locked in four by 90° positions or move free in between, as required
Direct-acting and compact valve up to diameter of DN 6.0
Flow factor (Kv) is 0.23m³/h
Medium is only in contact with the valve internals and the body
Operating temperature ranges between -10°C and 55°C
Power consumption is 8W


Pneumatic control
Shut-off, dosing, filling and venting
Small-scale instruments, laboratory and measuring technology
Welding technology


IP65 rated

Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Liquid, Neutral Gas
Type 2/2
Orifice Diameter 3mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Maximum Opening Time 20ms
Series 6013
Connection Gender Female
Thread Standard or Connection Type G
Maximum Closing Time 30ms
Flow Factor Kv 0.23m³/h
2 : Next working day (AU stock)
62 : 5 working days (Global stock)
Price (ex. GST) Each
$ 176.17
(exc. GST)
$ 193.79
(inc. GST)
Per unit
1 - 4
5 - 9
10 +
Related Products
Stainless steel bodied, 3-way, Type 330 Solenoid valves ...
Stainless steel bodied, 3-way, Type 330 Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in ...
Series 255 Two Way Normally Closed Solenoid Valves ...
Series 255 Two Way Normally Closed Solenoid Valves For use with water, steam, air, gasses, hot oils and hydrocarbons, alkaline washing agents Heat-resistant slip-over epoxy encapsulated coil Brass body and PTFE Seal Three-pin DIN connector rated to IP65 can be ...
PP and PVDF, 2 and 3 way, Type ...
PP and PVDF, 2 and 3 way, Type 124 Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power ...
Two-way, N/C, Gas Pilot/Burner Control Valves Two-way, direct ...
Two-way, N/C, Gas Pilot/Burner Control Valves Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection Pressure not required for operation Compact & lightweightISO ...