Asco Solenoid Valve SCG356A466VMS 115/50, 3 port , NC, 115 V ac, 1/4in

  • RS Stock No. 488-615
  • Mfr. Part No. SCG356A466VMS 115/50
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Three-way, Zero Pressure, N/C Valves

Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection.

Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 115 V ac
Number of Ports 3
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 3/2
Orifice Diameter 1.6mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +60 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Thread Standard or Connection Type G
Maximum Closing Time 10ms
Maximum Opening Time 10ms
Flow Factor Kv 0.08m³/h
Series 356
Connection Gender Female
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 122.02
(exc. GST)
$ 134.22
(inc. GST)
units
Per unit
1 - 5
$122.02
6 - 11
$118.82
12 +
$115.55
Related Products
Stainless steel bodied, 3-way, Type 330 Solenoid valves ...
Description:
Stainless steel bodied, 3-way, Type 330 Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in ...
PP and PVDF, 2 and 3 way, Type ...
Description:
PP and PVDF, 2 and 3 way, Type 124 Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power ...
3/2 way Compact, Type 6014Ex The direct-acting 3/2-way, ...
Description:
3/2 way Compact, Type 6014Ex The direct-acting 3/2-way, normally closed type 6014Ex solenoid valve is suitable for use with neutral and aggressive gases and fluids, for example: compressed air, town and natural gas, water, and hydraulic oil, in filling, dosing, ...
262 series 2 / 2 direct operated solenoid ...
Description:
262 series 2 / 2 direct operated solenoid valves 2 / 2 N/C direct-operated solenoid valves for vacuum service, 1/4" outletSpecial manufacturing procedures used to avoid molecular contamination. Do not require a minimum operating pressure.Suitable for low and medium vacuum ...