Asco Solenoid Valve SCG256A404VMS 24DC, 2 port , NC, 24 V dc, 1/4in

  • RS Stock No. 488-548
  • Mfr. Part No. SCG256B404VMS 24DC
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Two-way, Direct Operated, Zero Pressure, N/C Valves

Two-way, direct acting solenoid valves, normally closed with threaded port connection.

Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position

Note

Pressure ranges are for water and may differ for other media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 2.4mm
Body Material Brass
Maximum Working Pressure 4 bar
Operating Temperature Range -10 → +60 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Maximum Closing Time 10ms
Thread Standard or Connection Type G
Flow Factor Kv 0.16m³/h
Series 256
Connection Gender Female
Maximum Opening Time 10ms
7 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 130.23
(exc. GST)
$ 143.25
(inc. GST)
units
Per unit
1 - 5
$130.23
6 - 11
$128.44
12 +
$127.33
Related Products
PP and PVDF, 2 and 3 way, Type ...
Description:
PP and PVDF, 2 and 3 way, Type 124 Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power ...
Condensate Drain Valves Two-way, normally closed, condensate drain ...
Description:
Condensate Drain Valves Two-way, normally closed, condensate drain valve assembly with electronic timer Condensate Drain Valves are ideally suited to be used with compressors, are compact and lightweight, and offer adjustable on and off periods. Timer designed for automatic control ...
6211 Series 2//2 way Servo-Assisted, Normally Closed Solenoid ...
Description:
6211 Series 2//2 way Servo-Assisted, Normally Closed Solenoid Valves Brass body with separating servo membrane and polyamide coil Total or no control For use with gas, air, water and oils, other liquids that do not contain oils or greases, hot ...
262 series 2 / 2 direct operated solenoid ...
Description:
262 series 2 / 2 direct operated solenoid valves 2 / 2 N/C direct-operated solenoid valves for vacuum service, 1/4" outletSpecial manufacturing procedures used to avoid molecular contamination. Do not require a minimum operating pressure.Suitable for low and medium vacuum ...