Schneider Electric 25 A Soft Start ATS01 Series, IP20, 11 kW, 110 → 480 V

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Altistart Soft Start

Created and designed to operate as a torque limiter on starting, or as a soft start or soft stop unit for asynchronous motors. This range of soft starters enhances the starting performance of asynchronous motors by allowing them to start smoothly, gradually and in a controlled manner. They are compact and easy to install, the Altistart 01 series can be mounted side by side.

Features & Benefits

May be used with single or three phase motors

Note

Power ratings stated are for 3 phase 400V motors. These units may also be used with lower voltage 3 phase motors and single phase motors. Please refer to technical data sheet for further information.

ATS01N125FT Soft Starter

  • The main function of this component type is to perform as a soft starter or soft stop for one-phase loads

  • Forms part of the Altistart 01 product range

  • Commonly referred to as ATS01

  • Features a supply voltage of 110...480 V - 10...10 %

  • The starter rating is 25 A

  • Has a utilisation category of AC-53B conforming to EN/IEC 60947-4-2

  • The current consumption is 125 A at nominal load

  • Starts with a voltage ramp

  • Power dissipation - 1 W at full load and at end of starting, 126 W in a transient state

  • Dimensions - H124 mm X W45 mm X D131 mm

  • 1 greed LED will display when the starter is powered up and 1 yellow LED will display when the nominal voltage has been reached

Specifications
Attribute Value
Phase 1, 3
Supply Voltage 110 → 480 V
Current Rating 25 A
Voltage Rating 110 → 480 V
Control Voltage 240 V ac
Power Rating 11 kW
IP Rating IP20
Overall Length 124mm
Overall Width 45mm
Overall Depth 131mm
Minimum Operating Temperature -10 (Without Derating) °C, +40 (With Derating) °C
Maximum Operating Temperature +40 (Without Derating) °C, +50 (With Derating) °C
Series ATS01
14 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 392.09
(exc. GST)
$ 431.30
(inc. GST)
units
Per unit
1 +
$392.09
Related Products
Single Phase, Snatch Free, Soft Start Module Single ...
Description:
Single Phase, Snatch Free, Soft Start Module Single phase snatch-free soft start modules provide a compact and simple means of reducing the problems associated with the starting shocks of direct line started single phase induction motors Features and Benefits Reduced ...
Soft starter for AC current drives, IL9017 Robust ...
Description:
Soft starter for AC current drives, IL9017 Robust electronic control unit specially designed for the smooth start-up of single-phase asynchronous machines (AC current motors with auxiliary capacitor)After starting, the power electronics are bridged via an internal relay contact to minimise ...
Soft Start Control Module, 55C-25 Adjustable ramp rate ...
Description:
Soft Start Control Module, 55C-25 Adjustable ramp rate of between 1 to 60 seconds Adjustable pedestal 10-50%Internal snubber High inrush capability Suitable for most resistive & inductive loads such as heat lamps, fans, pumps and other ac. motor loads. Adjustable ...
Sirius 3RW30 May be integrated into a motor ...
Description:
Sirius 3RW30 May be integrated into a motor control system using other Sirius control gear products, eg. 3 pole circuit breakers from the 3RV10 range (see Control Gear section)Two phase control Adjustable start-up voltage between 40 to 100% of working ...