PR Electronics 3100 Series Isolating Signal Converter, Current, Voltage Input, Current, Voltage Output, 16.8 →
- RS Stock No.:
- 796-7070
- Mfr. Part No.:
- 3104
- Brand:
- PR Electronics
36 In Global stock for delivery within 10 working day(s)
Added
Price (ex. GST) Each
$401.09
(exc. GST)
$441.20
(inc. GST)
Units | Per unit |
1 + | $401.09 |
- RS Stock No.:
- 796-7070
- Mfr. Part No.:
- 3104
- Brand:
- PR Electronics
Legislation and Compliance
- COO (Country of Origin):
- DK
Product Details
3100 Type - Isolated Converter
3104, 3109 and 3114 type are for isolation and conversion of standard DC signals.
Suitable for galvanic separation of analog DC signals and elimination of ground loops and measurement of floating signals.
Suitable for galvanic separation of analog DC signals and elimination of ground loops and measurement of floating signals.
Features and Benefits
Conversion of standard DC signals
Slimline housing of 6 mm
Power supply and signal isolator for 2-wire transmitter
Loop supply >17 V
DIP-switch configured
Inputs and outputs are floating and galvanically separated
Isolation 2.5 mm²
Installation in ATEX Ex zone 2 / IECEx zone 2 / FM division 2
Slimline housing of 6 mm
Power supply and signal isolator for 2-wire transmitter
Loop supply >17 V
DIP-switch configured
Inputs and outputs are floating and galvanically separated
Isolation 2.5 mm²
Installation in ATEX Ex zone 2 / IECEx zone 2 / FM division 2
DIP-switch programming
Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.
Mounting
Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.
High level of isolation
Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.
Device status indicators
A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.
Over voltage- / polarity protection
All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.
PR Electronics DIN Rail Mounting
Specifications
Attribute | Value |
---|---|
Module Type | Signal Isolator |
Input Signal Type | Current, Voltage |
Output Signal Type | Current, Voltage |
Input Range | 0 → 10.25 V, 0 → 20.5mA |
Output Range | 0 → 10 V dc, 0 → 20.5mA |
Supply Voltage | 16.8 → 31.2V dc |
Hazardous Area Certification | ATEX |
Mounting Type | DIN Rail Mount |
Operating Temperature Range | -25 → +70°C |
Series | 3100 |
Minimum Operating Temperature | -25°C |
Maximum Operating Temperature | +70°C |
Related links
- RS PRO Signal Conditioner Voltage Input Voltage Output, 16.8 → 30V Supply
- PR Electronics 3100 Series Bipolar Isolated Converter Voltage...
- PR Electronics 3100 Series Isolating Signal Converter Current Output
- GIC Signal Conditioner Voltage Input Voltage Output, 24V dc Supply
- Wago Signal Conditioner Voltage Input Voltage Output, 24V dc Supply
- Wago 857 Series Signal Conditioner Voltage Input Voltage Output
- PR Electronics Signal Conditioner Current Current, Voltage Output
- Wago 770 Series Signal Converter Voltage Input Voltage Output