MODMYPI LTD MMP-0061 for use with Raspberry Pi

  • RS Stock No. 127-0209
  • Mfr. Part No. MMP-0061
  • Manufacturer MODMYPI LTD
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

PIco Fan Kit for Raspberry Pi, ModMyPi

PIco FAN Kit is an Advanced Active Cooling System for the Raspberry Pi and is easy to install by using the UPS Plco(Uninterruptible Power Supply and I2C HAT). The kit with the use of UPS Plco supervising circuits regulates any overheating of the Raspberry Pi board. Also has an embedded temperature measurement system which monitors and regulates the temperature by switching the fan on and off.

Uninterruptible Power Supply and I2C HAT are available to purchase RS 1270208

Raspberry Pi is not included and can be purchased separately (Raspberry Pi 3 - RS 8968660 and previous models)

Features

Powered from the J8 (P1) connector of the Raspberry Pi® via UPS PIco
PWM FAN speed regulation
1 RED LED-based information system (Light Red - hot, Light Red – cold)
Full control over the system via I2C interface (The PIco Interface)

Kit Contents

Micro Fan with cable
Set of 4 tree clips required for PIco FAN mounting UPS PIco PCB
Set of 4 rubber washers required for the PIco FAN mounting UPS PIco PCB
TO-92 temperature sensor
2 mm PCB connector for the FAN

Specifications
Attribute Value
For Use With Raspberry Pi
110 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 16.01
(exc. GST)
$ 17.61
(inc. GST)
units
Per unit
1 +
$16.01
Related Products
The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen ...
Description:
The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen display board that can be used with a Discovery development kit such as the STM32F769I-DISC1 Two interface adapters are also available. 4in TFT LCD touchscreen display panel Resolution: 480 x 800 pixels ...
Li Po SHIM (formerly known as Zero Li ...
Description:
Li Po SHIM (formerly known as Zero Li Po) aims to give you the most compact Raspberry Pi power supply possible You can either solder the 0.8mm thick PCB directly onto the GPIO pins on your Pi for a permanent ...
This kit combines the Raspberry Pi 3 with ...
Description:
This kit combines the Raspberry Pi 3 with the pi-topPULSE, plus the accessories you need to get up and running Learn, play or create fun projects with the Raspberry Pi and this add-on board. Add your choice of input device ...
1 x Raspberry Pi 3 Model B+ (137-3331) ...
Description:
1 x Raspberry Pi 3 Model B+ (137-3331) 1 x Black Case (167-7046) Processor: Broadcom BCM2837 Processor Quad core A53 (ARM v8) 64-bit SoCMemory: 1GB LPDDR2 SDRAM Bluetooth: Cypress BLE chip 2.4Ghz/5.0GHz IEEE 802.11ac Ethernet: Gigabit Ethernet over USB 2.0 ...