Carroll & Meynell, 1.2 kVA, 200 VA CM2250WM2 Single Phase Isolation Transformer, 230V ac, 10.2 A rms, 24 V ac

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Single Phase 230Vac Input, 24Vac & 110Vac Output, 1500VA Continuous Rating

High quality wall mounting safety isolating transformers designed to ensure safe electrical distribution for power tools and low voltage inspection lighting etc in industrial, garage, workshop and other fixed installations.

Double wound
110V secondary centre tapped to earth to minimise shock risk
Sheet steel IP22 type wall mounting enclosure
Resettable thermal cut out trip in primary circuit to prevent overload
Thermal safety overload fuse embedded into primary winding
20mm conduit entry on both sides of the case

Approvals

8888

Standards

EN60742; BS3535

Specifications
Attribute Value
Primary Voltage Rating 230V ac
Secondary Voltage Rating ±55 V ac, 24 V ac
Power Rating 1.2 kVA, 200 VA
Number of Phases 1
Output Current 10.2 A rms, 24 V ac
Series CM2250WM2
Plug Type Hard Wire L-N-E
Socket Type BS EN 60309
Weight 16kg
Length 240mm
Width 250mm
Depth 255mm
Dimensions 240 x 250 x 255mm
Mounting Type Wall Mount
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 603.41
(exc. GST)
$ 663.75
(inc. GST)
units
Per unit
1 - 9
$603.41
10 - 24
$527.34
25 - 49
$507.06
50 - 99
$499.10
100 +
$486.61
Related Products
Autowound transformers for step-up or step-down of mains ...
Description:
Autowound transformers for step-up or step-down of mains voltages at 50/60Hz. , Compact construction Full varnish impregnation Fully shrouded Four-hole fixing for permanent installation Terminal blocks with protective covers (except 50VA which has leads) 100% electrical and flash tested (2kV ...
Autowound transformers for step-up or step-down of mains ...
Description:
Autowound transformers for step-up or step-down of mains voltages at 50/60Hz. , Compact construction Full varnish impregnation Fully shrouded Four-hole fixing for permanent installation Terminal blocks with protective covers (except 50VA which has leads) 100% electrical and flash tested (2kV ...
The two independent secondary windings may be connected ...
Description:
The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options. Optional terminal shrouds for 75VA and 100VA.
High quality, low profile, triple output encapsulated safety ...
Description:
High quality, low profile, triple output encapsulated safety isolating transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230Va.c. or parallel for 115Va.c. operation. These transformers are designed for use in 5V and ±12Vd.c. power ...