Fluke I5SPQ3 Power Quality Analyser Clamp, Accessory Type Clamp, For Use With 434 Series, 435 Series

  • RS Stock No. 611-3247
  • Mfr. Part No. I5SPQ3
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

I5sPQ3 5 A current clamps

Set of three clamps specifically designed to measure low currents from 0 to 5 A.
This economical set is ideal for use with three-phase measuring instruments.
Accurate measurement without cutting off the circuit.
CAT III 600 V compliant.

Fluke AC Current Clamp

The Fluke 3 pieces of the i5s current clamps has a current range of 5A, especially configured to provide low current accuracy while taking measurements on secondary current transformers. This cost-saving 3-pack is perfect for use with 3-phase tools such as the Fluke 434 or Fluke 435. The compact shape makes transporting and storing convenient.

Features and Benefits

• Compact shape makes transporting and storing convenient the clamp measures only 116mm x 43mm x 23mm (4.6in x 1.7in x 0.9in)
• Take accurate readings without breakings the circuit
• Crest factor ≤ 3, add 0.7% to accuracy
• Input load impedance > 1Mohm in parallel with up to 47pF
• Output level(s) is 400mV/A
• Useable frequency ranges between 40Hz and 5kHz

Certifications

• CAT III 600V safety rated
• IEC/EN61010-1

Specifications
Attribute Value
Accessory Type Clamp
For Use With 434 Series, 435 Series
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) 1 Lot of 3 Set(s)
$ 2,326.00
(exc. GST)
$ 2,558.60
(inc. GST)
Lot(s)
Per Lot
Per unit*
1 +
$2,326.00
$775.333
*price indicative
Related Products
The i310s Current Clamp has been designed for ...
Description:
The i310s Current Clamp has been designed for use with oscilloscopes and digital multimeters for accurate nonintrusive measurement of AC, DC and complex waveform currents. Using Hall Effect technology, the clamp can accurately measure currents up to 450 A peak ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...
The Fluke i40s-EL Current Clamp-on Transformer is used ...
Description:
The Fluke i40s-EL Current Clamp-on Transformer is used for low current measurement, suitable for making measurements up to 40A and also measures accurately on 1A and 5A secondary current transformers. The i40s-EL jaw is capable of being clamped on current ...