STMicroelectronics STEVAL-ILL015V3 LED Driver for LED2472G

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

High Brightness LED2472G LED Driver Evaluation Board with Diagnostic

The STEVAL-ILL015V3 evaluation board has two LED2472G devices in TQFP48 package connected to 3 x 16 RGB high-brightness LEDs. The LED2472G device is a 24-bit constant-current LED sink driver with output error detection, suitable for applications such as large-area displays and full-color board panels.

STM32 microcontroller
Cost-effective internal high-side oscillator
JTAG interface for microcontroller firmware changes/updates
Mini USB connector for connection with a PC GUI
Test points on the board
Buttons and knob to control the board
Error and over-temperature flag for each LED driver
3 jumpers to simulate the disconnection of 3 LEDs
3 jumpers to simulate the shorting of 3 LEDs
Highly-efficient ST1S010 DC-DC switching power supply
Input: 7.5V to 18V, at 0.7A

LED Drivers, Lighting ICs, STMicroelectronics

Specifications
Attribute Value
Power Management Function LED Driver
Kit Classification Evaluation Board
Featured Device LED2472G
7 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 261.75
(exc. GST)
$ 287.93
(inc. GST)
units
Per unit
1 +
$261.75
Related Products
BU2090FS incorporates a built-in shift register and a ...
Description:
BU2090FS incorporates a built-in shift register and a latch circuit to control 12 LED by serial interface, linked to a microcontrollers LED can be driven directly. (Output current 25mA)12 bit parallel output Operational on low voltage (2.7V to 5.5V)Applications:MFP(Multi Function ...
The ROHM BD9397EFV series is a high-efficiency LED ...
Description:
The ROHM BD9397EFV series is a high-efficiency LED driver for white LEDs and designed for a large LCD panel This IC is a built-in high current drive with high responsibility type 6ch LED drivers and 1ch boost DC-DC converter. It ...
External, switch mode, encapsulated IP67 rated, constant voltage ...
Description:
External, switch mode, encapsulated IP67 rated, constant voltage power supplies High efficiency, long life and high reliability Designed for indoor or outdoor installations Suitable for LED lighting and moving sign applications Withstands 300Vac surge input for 5 seconds100% full load ...
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • ...