Microchip Battery Charger for MCP73871

  • RS Stock No. 681-0875
  • Mfr. Part No. MCP73871DM-VPCC
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP73871 Demonstration Board

The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control.

Integrated System Load Sharing
Input Current Limit Control hardware selected (typical 1650 mA, USB-High
Three LEDs to indicate charge status, low battery and power good signal
Preset Li-Ion battery charge voltage: 4.2V ± 0.5%
Temperature monitoring (is disabled by default)
Factory preset 0.1C preconditioning current of deeply depleted cells
Factory preset Safety Timer with Timer Enable feature
Constant Current/Constant Voltage (CC/CV) charge algorithm
Resistor programmed maximum charge current: 1A
Resistor programmed termination set point: 100 mA
Automatic Charge Termination
Automatic Recharge
Internal Thermal Regulation

Battery Management, Microchip

Specifications
Attribute Value
Power Management Function Battery Charger
Kit Classification Evaluation Board
Featured Device MCP73871
5 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 33.80
(exc. GST)
$ 37.18
(inc. GST)
units
Per unit
1 +
$33.80
Related Products
2215 Series, NiMH/Ni Cd Pack 35W Fast Chargers ...
Description:
2215 Series, NiMH/Ni Cd Pack 35W Fast Chargers 2-pin IEC 320 input connectionΔV full charge sensing, followed by a trickle charge Safety timer Dimensions L 107 x W. 67 x H. 36.5mm Weight 250g Note Battery holder not included Standards ...
COTEK Advanced Battery Charger Cotek CX 3 stage ...
Description:
COTEK Advanced Battery Charger Cotek CX 3 stage battery chargers are microprocessor controlled for fast and accurate charging of all deep-cycle batteries Universal AC input with active PFCCompatible with Lead Acid, Li-ion, Gel and AGM batteries Support remote controller CR-1 ...
Remote Temperature Compensation Sensor Optional sensor with 3 ...
Description:
Remote Temperature Compensation Sensor Optional sensor with 3 m integral lead that allows Sentinel chargers to measure battery temperature, and optimise charging by automatic compensation of the DC output voltageFor correct operation, the sensor head can be mounted on or ...
Tektronix TDS3ION Battery Charger for TDS3000C Battery charger ...
Description:
Tektronix TDS3ION Battery Charger for TDS3000C Battery charger for use with Tektronix TDS3000C Series digital phosphor oscilloscopes Input 100-200Vac, 50/60Hz, 10AOutput 30W, 18Vdc, 1.67A (current limited)Operating temperature +5 to +50°C (+41 to +122°F)Maximum operating altitude 3000m Operating humidity 10% to ...