ON Semiconductor NCP4371QC30GEVB Qualcomm Quick Charge 3.0 Charger Reference Design Evaluation Board

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The NCP4371QC30GEVB Evaluation Board is designed to effectively evaluate the NCP4371, which is a USB secondary side fast-charging controller, supporting Qualcomm Quick Charge™ 3.0 (QC 3.0) High Voltage Dedicated Charging Port (HVDCP) Class A and Class B specification. NCP4371 allows for selection of the output voltage of an AC-DC USB adapter based on commands from the Portable Device (PD) being powered. Selecting a higher charging voltage will reduce the charging current for a given power level resulting in reduced IR drops and increased system efficiency. Another advantage of QC3.0 is a decreased battery charging time and a reduced PD system cost thanks to the ability to select an optimum charging voltage. This eliminates the need for costly DC-DC converters within the PD. The USB-bus voltage can be controlled in discreet steps from 3.6V up to 20V. The output current is limited not to exceed maximum allowable power level.

Specifications
Attribute Value
Power Management Function Secondary Side Controller
Kit Classification Evaluation Board
For Use With Qualcomm Quick Charge
Featured Device NCP4371AACDR2G, NCP4371AADDR2G, NCP4371AAEDR2G
Kit Name Qualcomm Quick Charge 3.0 Charger Reference Design Evaluation Board
3 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 236.84
(exc. GST)
$ 260.52
(inc. GST)
units
Per unit
1 +
$236.84
Related Products
MCP6N11 Instrumentation Amplifier Wheatstone Bridge Reference Design This ...
Description:
MCP6N11 Instrumentation Amplifier Wheatstone Bridge Reference Design This board demonstrates the performance of Microchips MCP6N11 instrumentation amplifier (INA) and a traditional three op amp INA using Microchips MCP6V26 and MCP6V27 auto-zeroed op amps The input signal comes from an RTD ...
The 12V Protected switch shield for Arduino comes ...
Description:
The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 15mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive ...
The NCP3063 Series is a higher frequency upgrade ...
Description:
The NCP3063 Series is a higher frequency upgrade to the popular MC34063A and MC33063A monolithic DC-DC converters These devices consist of an internal temperature compensated reference, comparator, a controlled duty cycle oscillator with an active current limit circuit, a driver ...
The NCP1397GANGEVB reference design provides a 12 V/20 ...
Description:
The NCP1397GANGEVB reference design provides a 12 V/20 A power supply using Gallium Nitride (GaN) HEMTs as the switching devices The front-end of the power converter converts a universal AC line to a 385 dc bus while achieving near unity ...