Intersil ISL95338EVAL1Z Bidirectional Buck-Boost Voltage Regulator Evaluation Board Buck-Boost Converter for ISL95338

  • RS Stock No. 158-5320
  • Mfr. Part No. ISL95338EVAL1Z
  • Manufacturer Intersil
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The ISL95338 is a bidirectional, buck-boost voltage regulator that provides buck-boost voltage regulation and protection features. Intersil’s advanced R3™ Technology is used to provide high light-load efficiency, fast transient response, and seamless DCM/CCM transitions. The ISL95338 takes input power from a wide range of DC power sources (conventional AC/DC ADPs, USB PD ports, travel ADPs, etc.) and safely converts it to a regulated voltage up to 24V

Bidirectional buck, boost, and buck-boost operation
Input voltage range 3.8V to 24V (no dead zone)
Output voltage up to 20V
Up to 1MHz switching frequency
Programmable soft-start time
LDO output for VDD and VDDP
System status alert function
Bidirectional internal discharge function
Active switching for negative voltage transitions
Bypass mode in both directions
Forward mode enable, Reverse mode enable

Specifications
Attribute Value
Power Management Function Buck-Boost Converter
Kit Classification Evaluation Board
For Use With Bidirectional Buck-Boost Voltage Regulator
Featured Device ISL95338
Kit Name Bidirectional Buck-Boost Voltage Regulator Evaluation Board
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 272.52
(exc. GST)
$ 299.77
(inc. GST)
units
Per unit
1 +
$272.52
Related Products
BD9B301MUV-LB is a synchronous buck switching regulator with ...
Description:
BD9B301MUV-LB is a synchronous buck switching regulator with built-in low on-resistance power MOSFETs. This IC, which is capable of providing current up to 3A, features fast transient response by employing constant on-time control system. It offers high oscillating frequency at ...
The NCP3063 Series is a higher frequency upgrade ...
Description:
The NCP3063 Series is a higher frequency upgrade to the popular MC34063A and MC33063A monolithic DC-DC converters. These devices consist of an internal temperature compensated reference, comparator, a controlled duty cycle oscillator with an active current limit circuit, a driver ...
The NCP1608 is an active power factor correction ...
Description:
The NCP1608 is an active power factor correction (PFC) controller specifically designed for use as a pre-converter in ac-dc adapters, electronic ballasts, and other medium power off-line converters (typically up to 350 W). It uses Critical Conduction Mode (CrM) to ...
The NCP1607 is a voltage mode power factor ...
Description:
The NCP1607 is a voltage mode power factor correction controller designed to drive cost-effective converters to meet input line harmonic regulations. The device operates in Critical Conduction Mode (CRM) for optimal performance in applications up to about 300 W. Its ...