STMicroelectronics STEVAL-ISB041V1 Battery Charger for STBC02

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

STEVAL-ISB041V1 Li-Ion/Li-Po Battery Charger Evaluation Board

The STEVAL-ISB041V1 board is based on an STBC02 battery power management chip, integrating a linear charger for single-cell Li-Ion batteries with protection functions, an LDO regulator, two SPDT load switches and intelligent reset logic. It will charge single-cell Li-Ion/Li-Po batteries with a CC-CV algorithm and charge termination. The STEVAL-ISB041V1 can work in stand-alone mode and the STBC02 controlled via a single-wire interface.

• Fast-charge current up to 450mA • Pre-charge current from 1mA to 450mA
• Adjustable floating voltage up to 4.45V
• On-chip always-on low quiescent current LDO regulator
• On-chip 2 x 3Ω SPDT load switches
• Reset generator triggered by USB detection
• Automatic power path management
• Auto-recharge function
• Battery over-charge, over-discharge and overcurrent protection
• Charging timeout to terminate the charging process for safety reasons
• Shipping mode allows low battery leakage when over-discharged
• Very low battery leakage in over-discharge and shutdown mode
• Charge/fault status output
• Battery voltage pin allows external gauging
• SWIRE interface allows the STBC02 functions to be controlled externally
• Powered from micro-AB USB connector

Battery Charging & Monitoring, STMicroelectronics

Specifications
Attribute Value
Power Management Function Battery Charger
Kit Classification Evaluation Board
Featured Device STBC02
7 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 52.81
(exc. GST)
$ 58.09
(inc. GST)
units
Per unit
1 +
$52.81
Related Products
COTEK Advanced Battery Charger Cotek CX 3 stage ...
Description:
COTEK Advanced Battery Charger Cotek CX 3 stage battery chargers are microprocessor controlled for fast and accurate charging of all deep-cycle batteries Universal AC input with active PFCCompatible with Lead Acid, Li-ion, Gel and AGM batteries Support remote controller CR-1 ...
Remote Temperature Compensation Sensor Optional sensor with 3 ...
Description:
Remote Temperature Compensation Sensor Optional sensor with 3 m integral lead that allows Sentinel chargers to measure battery temperature, and optimise charging by automatic compensation of the DC output voltageFor correct operation, the sensor head can be mounted on or ...
Evaluation board for the NCP160 linear regulator capable ...
Description:
Evaluation board for the NCP160 linear regulator capable of supplying 250 mA output current Designed to meet the requirements of RF and analogue circuits, the NCP160 device provides low noise, high PSRR, low quiescent current, and very good load/line transients. ...
The NCP1599 is a fixed 1 MHz, high-output-current, ...
Description:
The NCP1599 is a fixed 1 MHz, high-output-current, synchronous PWM converter that integrates a low-resistance, high-side P-channel MOSFET and a low-side N-channel MOSFET The NCP1599 utilizes internally compensated current mode control to provide good transient response, ease of implementation, and ...