Hi-Force Single, Portable Low Height Hydraulic Cylinder, HPS51, 4.5T, 16mm stroke

  • RS Stock No. 808-062
  • Mfr. Part No. HPS51
  • Manufacturer Hi-Force
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Low Height Pad Cylinders-High Pressure

Combine minimum collapsed height with optimum stroke
They provide a short adjusting and lifting force in confined work areas
Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension

//media.rs-online.com/t_line/L808056-01.gif

Low Height Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately

Warning

  • Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specifications
Attribute Value
Manufacturer Series HPS
Single/Double Acting Single
Capacity 4.5t
Stroke 16mm
Closed Height 42mm
Extended Height 58mm
Cylinder Effective Area 6.4cm²
Oil Capacity 10cm³
Outside Diameter 60mm
Maximum Operating Pressure 700 bar
Weight 900g
On back order for despatch 30/01/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 465.36
(exc. GST)
$ 511.90
(inc. GST)
units
Per unit
1 +
$465.36
Related Products
For lifting and pushing applications where flexibility and ...
Description:
For lifting and pushing applications where flexibility and high cycle requirements exist Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity Suitable for use in a ...
Use where collapsed height is a premier requirement ...
Description:
Use where collapsed height is a premier requirement in a lifting, levelling or pushing application Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity
Single acting cylinder pump-sets for lifting and push ...
Description:
Single acting cylinder pump-sets for lifting and push applications The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a single speed ...
Very low height cylinders combine minimum closed height ...
Description:
Very low height cylinders combine minimum closed height with maximum stroke to provide a short adjusting and lifting force in very confined work areas All cylinders have a 6mm stroke and are manufactured to the same high standards as our ...