Pepperl + Fuchs PLC I/O Module 2 Inputs, 24 V dc, 99 x 22.5 x 85 mm

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

AS-I Analogue Module

2 analogue inputs
Housing with removable terminals
Communication monitoring
Addressing jack
Supply of inputs external or from the module, as required
Function indication for bus, internal
and external sensor power supply, inputs

//media.rs-online.com/t_line/L316042-01.gif

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specifications
Attribute Value
Number of Inputs 2
Input Type Analogue
Number of I/O 2
Voltage Category 24 V dc
Length 99mm
Width 22.5mm
Depth 85mm
Dimensions 99 x 22.5 x 85 mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +70°C
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each
$ 688.86
(exc. GST)
$ 757.75
(inc. GST)
units
Per unit
1 +
$688.86
Related Products
Modicon M340 Analogue Output Modules The BMX AMO ...
Description:
Modicon M340 Analogue Output Modules The BMX AMO 0210 module is a module with 2 high-level isolated outputs (15 bits + sign) It offers, for each of them, the ranges: Voltage: ±10VCurrent: 0 to 20mA and 4 to 20mAThe range ...
Analogue Output Module - 2 Channel with Transformer ...
Description:
Analogue Output Module - 2 Channel with Transformer Insulation These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs 16 bit resolution Fast conversion rate improves control Built-in EEPROM for storing set-up data Only ...
FX5 - Unpowered I/O Modules The first model ...
Description:
FX5 - Unpowered I/O Modules The first model in the iQ-F series is the FX5U, offering high performance in a compact, cost effective packageThe FX5U continues the FX tradition of total flexibility by offering a huge range of new and ...
Digital I/O Module, China Certified A range of ...
Description:
Digital I/O Module, China Certified A range of Siemens SIMATIC S7-200 extension modules certified for full use within the China market Extension module for S7-22x controllers, China Certified Extremely compactDIN rail or panel mount Note For S7-22X CPU only. A ...