MC33204DG ON Semiconductor, Low Voltage, Op Amp, RRIO, 2.2MHz, 1.8 → 12 V, 14-Pin SOIC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MC33201/2/4, NCV33202/4, 12V Low Noise, Rail-to-Rail I/O, High Output Drive, Operational Amplifiers, ON Semiconductor

The ON Semiconductor MC33201/2/4, NCV33202/4 Op Amps provide rail-to-rail operation on both the input and output. Drive inputs as high as 200 mV beyond the supply rails without phase reversal on the outputs, and the output can swing within 50 mV of each rail. This rail-to-rail operation enables you to make full use of the supply voltage range available.

Output current boosting techniques provide a high output current capability while keeping the drain current of the amplifier to a minimum. Low noise and distortion with a high slew rate and drive capability make them ideal for audio applications.

Low Voltage, Single Supply Operation (+1.8 V and Ground to +12 V and Ground)
Input Voltage Range Includes both Supply Rails
Output Voltage Swings within 50 mV of both Rails
No Phase Reversal on the Output for Over-driven Input Signals
High Output Current (ISC = 80 mA, Typical)
Low Supply Current (ID = 0.9 mA, Typical)
600 W Output Drive Capability
Typical Gain Bandwidth Product = 2.2 MHz

Operational Amplifiers, ON Semiconductor

Specifications
Attribute Value
Amplifier Type Low Voltage
Mounting Type Surface Mount
Package Type SOIC
Power Supply Type Single
Number of Channels per Chip 4
Pin Count 14
Typical Single Supply Voltage 1.8 → 12 V
Typical Gain Bandwidth Product 2.2MHz
Typical Slew Rate 1V/µs
Maximum Operating Frequency 100 kHz
Maximum Operating Temperature +105 °C
Minimum Operating Temperature -40 °C
Length 8.75mm
Dimensions 8.75 x 4 x 1.5mm
Typical Input Voltage Noise Density 25nV/√Hz
Height 1.5mm
Rail to Rail Rail to Rail Input/Output
Width 4mm
Typical Voltage Gain 109.5 dB
Temporarily out of stock - back order for despatch when stock is available
Price (ex. GST) Each (In a Pack of 2)
$ 2.03
(exc. GST)
$ 2.23
(inc. GST)
units
Per unit
Per Pack*
2 - 8
$2.03
$4.06
10 - 38
$1.665
$3.33
40 - 98
$1.475
$2.95
100 - 198
$1.33
$2.66
200 +
$1.22
$2.44
*price indicative
Packaging Options:
Related Products
Intersil Operational Amplifiers are among high-performance amplifier ICs ...
Description:
Intersil Operational Amplifiers are among high-performance amplifier ICs in the industry Low input offset voltage: 40 μV, Max.Low offset drift: 150 nV/°C, Max.Input bias current: 250 pA, Max.Quiescent current: 20 μA, Typical per amplifier Single supply range: +1.8 V to ...
The NCS5651 is a high efficiency, class A/B, ...
Description:
The NCS5651 is a high efficiency, class A/B, low distortion power line driver It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up ...
1 mV max (CLC1003) input offset voltage6 mV ...
Description:
1 mV max (CLC1003) input offset voltage6 mV max. (CLC2023) input offset voltage0.00005% THD at 1 k Hz5.3 nV/√Hz input voltage noise-90 dB/-85 dB HD2/HD3 (100 k Hz, 100 Ω).
Intersil Operational Amplifiers are among high-performance amplifier ICs ...
Description:
Intersil Operational Amplifiers are among high-performance amplifier ICs in the industry Low input offset voltage: 40 μV, Max.Low offset drift: 150 nV/°C, Max.Input bias current: 250 pA, Max.Quiescent current: 20 μA, Typical per amplifier Single power supply from +1.8 V ...