Weidmuller, SAK Series , 800 V Feed Through Terminal Block, Screw Termination

  • RS Stock No. 829-6625
  • Mfr. Part No. SAK 4 KRG
  • Manufacturer Weidmüller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): HU
Product Details

SAK Series Modular Feed Through Terminals

High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 with a working temperature of -50°C to +100°C, and meet the requirements of IEC 60947-1.

Features and Benefits

• Steel clamping yoke for mechanical function • Copper current bar for electrical function
• No maintenance, vibration-proof screw connection
• Low voltage drop and gas-tight contact point
• Clamping point suitable for a wide range of cross-sections
• Three different locking feet available: for TS32, TS35 or a combination of the two
• Different isolation materials: PA6.6, KrG, KrS
• Large selection of special terminals with various connection systems

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specifications
Attribute Value
Series SAK
Wire Size 26 → 10 AWG
Colour Yellow
Current Rating 32A
Number of Levels Single
Termination Method Screw
Voltage Rating 800 V
Minimum Operating Temperature -60°C
Maximum Operating Temperature +130°C
40 : Next working day (AU stock)
580 : 5 working days (Global stock)
Price (ex. GST) Each (In a Pack of 10)
$ 2.206
(exc. GST)
$ 2.427
(inc. GST)
units
Per unit
Per Pack*
10 +
$2.206
$22.06
*price indicative
Related Products
Standard or feed through rated at 750V Terminals ...
Description:
Standard or feed through rated at 750V Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
Grey for standard circuit, blue for neutral conductor, ...
Description:
Grey for standard circuit, blue for neutral conductor, orange for circuit not broken by the master isolating device, red for special circuits (safety, protected, etc), green for protection conductor class II equivalent assemblies Used to make the electrical connection between ...
Earth terminal blocks that provide reliable electrical and ...
Description:
Earth terminal blocks that provide reliable electrical and mechanical contact with the DIN Rail • Green/yellow colour coded• Flexibility to snap onto symmetrical and asymmetrical rails• Screw clamp connection.
The ’W’ series screw clamp terminals are suitable ...
Description:
The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 66 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. ...