RS PRO Cable Tester Coaxial, RJ45

An innovative cable tester for faults such as open, shorted and crossed pairs, (core/core or core/shield) connectors, presented by RS PRO.

Compare one transmitting end to the receiving end, with easy to read correct pin configuration. Our tester equipment allows easy to read continuity or fault status, remote testing allows testing of installed cables from wall jack or patch panel. The device comes with 2 RJ45 sockets, 2 adapter cables (BNC/RJ45) for coaxial cables and a remote kit. A two line display (LED) indicates in sequence which pin of the RJ45 plug on cable end A is connected to which pin of cable end B; manual or automatic stepping is possible; if there is a short-circuit, more than 2 LEDs light up simultaneously.

Continuity test of coaxial cables with BNC plug and 8-pin data lines with fastened RJ-45 plug
The device detects open and short-circuited (core/core or core/shield) connections
A two line display (LED) indicates in sequence which pin of the RJ-45 plug on cable end A is connected to which pin of cable end B; manual or automatic stepping is possible; if there is a short-circuit, more than 2 LEDs light up simultaneously
The device has 2 RJ-45 sockets; the remote kit included also enables testing of cables routed in the wall
There are two adapter cables (BNC/RJ-45) provided to test coaxial cables

Displays the actual pin configuration of 10BASE-T and 10BASE-2 Ethernet, RJ45/RJ11 modular, 258A, TIA-568A/568B and token ring cables

Included: Master Unit, Remote unit, 2 x RJ45 male to BNC male adapter cable, RJ45 UTP patch cable, BNC female/female coupler and 2 x RJ24/RJ11 jack size adapters.