Bosch Rexroth CETOP Mounting Hydraulic Pressure Reducing Valve, R900483786, 75bar

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Pressure Reducing Valves - Size 6

Three-way, direct operated, sandwich plate design
Two pressure ranges available
For use in multi-pressure systems where a part of the equipment is required to operate at a lower pressure
Open in the neutral position
Pressure gauge port BSP x 12mm deep
Mounting pattern to DIN 24 340 form A6
M5 fixing screws required (sold separately)

//media.rs-online.com/t_line/L728922-01.gif
//media.rs-online.com/t_line/L728922-02.gif
//media.rs-online.com/t_line/L728938-01.gif

Pressure Reducing Valves

These CETOP mounting pressure reducing valves are designed for use in multi-pressure systems where some equipment operates at a lower pressure. They are suitable for use with mineral oil (HL, HLP) to DIN 51524 fluid types from 10 to 800 mm²/second viscosity.

Specifications
Attribute Value
Pressure Reduction 75bar
Maximum Flow Rate 50L/min
3 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 340.14
(exc. GST)
$ 374.15
(inc. GST)
units
Per unit
1 +
$340.14
Related Products
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...
Parkers ZDR series of pilot operated CETOP 03 ...
Description:
Parkers ZDR series of pilot operated CETOP 03 reducing valves are designed for systems with a maximum flow rate of up to 80 ml/min The sandwich / stackable design allows various circuit elements to be mounted together under the directional ...
CETOP mounting hydraulic pressure relief valves suitable for ...
Description:
CETOP mounting hydraulic pressure relief valves suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 10 to 800 mm²/second viscosity Sandwich plate design Closed at rest with relief to tank when the pre-set pressure ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second Suitable for use with water or compressed air Can be installed in any position and serviced ...