XY2CE Grab Wire Switch with E-Stop, 2 x 35 → 2 x 100m, 2NC, 2NO
- RS Stock No. 130-0875
- Mfr. Part No. XY2CEDA196H7
- Manufacturer Telemecanique
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
| Attribute | Value |
|---|---|
| Range | Preventa XY2 |
| Series | XY2CE |
| Reset Button | Yes |
| Pole Configuration | DPST |
| Normal State Configuration | 2NC, 2NO |
| Indicator Type | Rope Tension |
| Maximum Rope Span | 2 x 35 → 2 x 100m |
| Maximum Current | 3 A ac, 270 mA dc |
| Maximum AC Voltage | 24 → 130V |
| Maximum DC Voltage | 24 → 130V |
| Housing Material | Stainless Steel (Cover), Zamak (Body) |
| Number of Cable Entries | 3 |
| Size of Cable Entries | 1/2 NPT |
| Length | 285mm |
| Standards Met | CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508 |
| Depth | 142mm |
| Minimum Operating Temperature | -25°C |
| Hazardous Area Certification | ATEX |
| Maximum Operating Temperature | +70°C |
| IP Rating | IP66 |
| E-Stop Button | Yes |
| Width | 106mm |
| Dimensions | 285 x 106 x 142 mm |
